Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 04 05 21pl9 cirsa25
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download cirsa25 documenatation <<Text preview - extract from the document 05-1381
DIAGNOSTICS - NAVIGATION SYSTEM 05FHL-04
MUTE SIGNAL CIRCUIT (FROM STEREO COMPONENT
CONTROLLER ASSY)
CIRCUIT DESCRIPTION
The radio and navigation assy controls the volume according to the MUTE signal from the stereo component
controller assy.
The MUTE signal is sent to reduce noise and a popping sound generated when switching the mode, etc.
If there is an open in the circuit, noise can be heard from the speakers when changing the sound source.
If there is a short in the circuit, even though the radio and navigation assy is normal, no sound or only an
extremely small sound can be produced.
WIRING DIAGRAM
Stereo Component Radio and
Controller Assy Navigation Assy
13 12 7 6
LG LG R-W
MUTE R24 BK2 IH3 R14 MUTE
I45237
INSPECTION PROCEDURE
1 INSPECT RADIO AND NAVIGATION ASSY
Wire Harness View: (a) Measure the voltage according to the value(s) in the table
below.
Standard:
R14 Tester connection Condition Specified condition
Turn ignition switch to
MUTE - Body ground ACC, Audio system is Above 3.5 V Below 1 V
playing Changing mode
OK PROCEED TO NEXT CIRCUIT INSPECTION
MUTE I44630
SHOWN IN PROBLEM SYMPTOMS TABLE
(SEE PAGE 05-1286 )
NG
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 1564
05-1382
DIAGNOSTICS - NAVIGATION SYSTEM
2 CHECK HARNESS AND CONNECTOR(RADIO AND NAVIGATION ASSY - STEREO
COMPONENT CONTROLLER ASSY)
Radio and Navigation Assy (a) Disconnect the radio and navigation assy connector R14
Wire Harness View: and stereo component controller assy connector R24.
(b) Measure the resistance according to the value(s) in the
table below.
R14 Standard:
Tester connection Condition Specified condition
MUTE - MUTE Always Below 1
MUTE - Body ground Always 10 k or higher
MUTE I38655
Stereo Component Controller Assy
Wire Harness View:
R24
MUTE NG REPAIR OR REPLACE HARNESS OR
I35035 CONNECTOR
OK
3 REPLACE STEREO COMPONENT CONTROLLER ASSY (SEE PAGE 67-24 )
(a) Replace the stereo component controller assy and check if it operates normally.
OK: The navigation system operates normally.
OK NORMAL OPERATION
NG
REPLACE RADIO AND NAVIGATION ASSY (SEE PAGE 67-9 )
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 1565
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo