Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 04 05 21q2h73z b011745
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download b011745 documenatation <<
Text preview - extract from the document
05-842
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM 0525R-21
DTC B0117/45 SHORT IN SIDE SQUIB (LH) CIRCUIT (TO
GROUND)
CIRCUIT DESCRIPTION
The side squib LH circuit consists of the airbag sensor assy center and the separate type front seat back
assy (LH).
This circuit instructs the SRS to deploy when deployment conditions are met.
DTC B0117/45 is recorded when a short to ground is detected in the side squib LH circuit.
DTC No. DTC Detecting Condition Trouble Area
S The airbag sensor assy center receives a short circuit to
S Separate type front seat back assy (LH)
ground signal in the side squib LH circuit for 0.5 seconds.
B0117/45 S Airbag sensor assy center
S Side squib LH malfunction
S Floor wire
S Airbag sensor assy center malfunction
WIRING DIAGRAM
See page 05-836 .
INSPECTION PROCEDURE
1 CHECK FLOOR WIRE(SIDE SQUIB LH CIRCUIT)
(a) Turn the ignition switch to the LOCK position.
Side Squib LH Floor Wire
(b) Disconnect the negative (-) terminal cable from the bat-
A Airbag tery, and wait for at least 90 seconds.
D C B Sensor (c) Disconnect the connectors from the airbag sensor assy
Assy center and the separate type front seat back assy (LH).
Center (d) Measure the resistance according to the value(s) in the
table below.
S18
Standard:
SFL+ SFL- Tester connection Condition Specified condition
S18-1 (SFL+) -
Always 1 M or Higher
Body ground
S18-2 (SFL-) -
Always 1 M or Higher
Body ground
H01016
H44043 H44449 NG REPAIR OR REPLACE FLOOR WIRE
OK
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 1025
05-843
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
2 CHECK AIR BAG SENSOR ASSY CENTER
(a) Connect the connector to the airbag sensor assy center.
Side Squib LH Floor Wire (b) Using a service wire, connect S18-1 (SFL+) and S18-2
(SFL-) of connector "C".
Airbag
D C Sensor
NOTICE:
Assy Do not forcibly insert a service wire into the terminals of the
S18 Center connector when connecting.
(c) Connect the negative (-) terminal cable to the battery,
SFL+ SFL- and wait for at least 2 seconds.
(d) Turn the ignition switch to the ON position, and wait for at
least 60 seconds.
(e) Clear the DTCs stored in memory (see page 05-777 ).
Service Wire
(f) Turn the ignition switch to the LOCK position.
DLC3 DTC B0117/45 (g) Turn the ignition switch to the ON position, and wait for at
least 60 seconds.
(h) Check the DTCs (see page 05-777 ).
OK:
DTC B0117/45 is not output.
CG TC
H01017
HINT:
H44044
H10600 H01071 H44619 Codes other than code B0117/45 may be output at this time, but
they are not related to this check.
NG REPLACE AIR BAG SENSOR ASSY CENTER
(SEE PAGE 60-56 )
OK
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 1026
05-844
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
3 CHECK SEPARATE TYPE FRONT SEAT BACK ASSY(SIDE SQUIB LH)
(a) Turn the ignition switch to the LOCK position.
Side Squib LH (b) Disconnect the negative (-) terminal cable from the bat-
Airbag tery, and wait for at least 90 seconds.
DC Sensor (c) Disconnect the service wire from connector "C".
Assy (d) Connect the connector to the separate type front seat
Center back assy (LH).
(e) Connect the negative (-) terminal cable to the battery,
and wait for at least 2 seconds.
DLC3 DTC B0117/45
(f) Turn the ignition switch to the ON position, and wait for at
least 60 seconds.
(g) Clear the DTCs stored in memory (see page 05-777 ).
(h) Turn the ignition switch to the LOCK position.
CG TC (i) Turn the ignition switch to the ON position, and wait for at
H01018
H10600 H01071 H40992 least 60 seconds.
(j) Check the DTCs (see page 05-777 ).
OK:
DTC B0117/45 is not output.
HINT:
Codes other than code B0117/45 may be output at this time, but
they are not related to this check.
NG REPLACE SEPARATE TYPE FRONT SEAT
BACK ASSY (LH) (SEE PAGE 72-12 , 72-22 )
OK
USE SIMULATION METHOD TO CHECK (SEE PAGE 05-770 )
HINT:
S Perform the simulation method by selecting the check mode with the hand-held tester (see page
05-780 ).
S After selecting the check mode, perform the simulation method by wiggling each connector of the air-
bag system or driving the vehicle on a city or rough road (see page 05-780 ).
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 1027
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo