Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 04 05 21q2h73z b011144
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download b011144 documenatation <<
Text preview - extract from the document
05-827
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM 0525M-06
DTC B0111/44 OPEN IN SIDE SQUIB (RH) CIRCUIT
CIRCUIT DESCRIPTION
The side squib RH circuit consists of the airbag sensor assy center and the separate type front seat back
assy (RH).
The circuit instructs the SRS to deploy when deployment conditions are met.
DTC B0111/44 is recorded when an open circuit is detected in the side squib RH circuit.
DTC No. DTC Detecting Condition Trouble Area
S The airbag sensor assy center receives an open circuit
S Separate type front seat back assy (RH)
signal in the side squib RH circuit for 2 seconds.
B0111/44 S Airbag sensor assy center
S Side squib RH malfunction
S Floor wire No.2
S Airbag sensor assy center malfunction
WIRING DIAGRAM
See page 05-824 .
INSPECTION PROCEDURE
1 CHECK FLOOR WIRE NO.2(SIDE SQUIB RH CIRCUIT)
(a) Turn the ignition switch to the LOCK position.
Floor Wire No.2 (b) Disconnect the negative (-) terminal cable from the bat-
tery, and wait at least for 90 seconds.
Airbag
Sensor
(c) Disconnect the connectors from the airbag sensor assy
Side Squib RH
C Assy center and the separate type front seat back assy (RH).
A Center (d) Measure the resistance according to the value(s) in the
table below.
D B
Standard:
S19
Tester connection Condition Specified condition
S19-1 (SFR+) -
Always Below 1
SFR+ SFR- S19-2 (SFR-)
H01019
H44043 H44447 NG REPAIR OR REPLACE FLOOR WIRE NO.2
OK
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 1010
05-828
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
2 CHECK AIR BAG SENSOR ASSY CENTER
Floor Wire No.2
(a) Connect the connector to the airbag sensor assy center.
(b) Using a service wire, connect S19-1 (SFR+) and S19-2
Airbag (SFR-) of connector "C".
Sensor
Side Squib RH C NOTICE:
Assy
Do not forcibly insert a service wire into the terminals of the
Center
connector when connecting.
D
S19 (c) Connect the negative (-) terminal cable to the battery,
and wait for at least 2 seconds.
SFR+ SFR-
(d) Turn the ignition switch to the ON position, and wait for at
least 60 seconds.
(e) Clear the DTCs stored in memory (see page 05-777 ).
Service Wire (f) Turn the ignition switch to the LOCK position.
(g) Turn the ignition switch to the ON position, and wait for at
DLC3 DTC B0111/44 least 60 seconds.
(h) Check the DTCs (see page 05-777 ).
OK:
DTC B0111/44 is not output.
CG
H01020
TC HINT:
H44044
H10600 H01070 H44615 Codes other than code B0111/44 may be output at this time, but
they are not related to this check.
NG REPLACE AIR BAG SENSOR ASSY CENTER
(SEE PAGE 60-56 )
OK
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 1011
05-829
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
3 CHECK SEPARATE TYPE FRONT SEAT BACK ASSY(RH)
(a) Turn the ignition switch to the LOCK position.
(b) Disconnect the negative (-) terminal cable from the bat-
Airbag
tery, and wait for at least 90 seconds.
Sensor (c) Disconnect the service wire from connector "C".
Side Squib RH Assy (d) Connect the connector to the separate type front seat
Center back assy (RH).
(e) Connect the negative (-) terminal cable to the battery,
DC
and wait for at least 2 seconds.
DLC3 DTC B0111/44 (f) Turn the ignition switch to the ON position, and wait for at
least 60 seconds.
(g) Clear the DTCs stored in memory (see page 05-777 ).
(h) Turn the ignition switch to the LOCK position.
CG TC (i) Turn the ignition switch to the ON position, and wait for at
H01021
H10600 H01070 H40981 least 60 seconds.
(j) Check the DTCs (see page 05-777 ).
OK:
DTC B0111/44 is not output.
HINT:
Codes other than code B0111/44 may be output at this time, but
they are not related to this check.
NG REPLACE SEPARATE TYPE FRONT SEAT
BACK ASSY (RH) (SEE PAGE 72-30 )
OK
USE SIMULATION METHOD TO CHECK (SEE PAGE 05-770 )
HINT:
S Perform the simulation method by selecting the check mode with the hand-held tester (see page
05-780 ).
S After selecting the check mode, perform the simulation method by wiggling each connector of the air-
bag system or driving the vehicle on a city or rough road (see page 05-780 ).
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 1012
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo