Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 04 05 21q2h73z b013261
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download b013261 documenatation <<
Text preview - extract from the document
05-867
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM 0525V-23
DTC B0132/61 SHORT IN P/T SQUIB (RH) CIRCUIT (TO
GROUND)
CIRCUIT DESCRIPTION
The P/T squib RH circuit consists of the airbag sensor assy center and the front seat outer belt assy RH.
This circuit instructs the SRS to deploy when deployment conditions are met.
DTC B0132/61 is recorded when a short to ground is detected in the P/T squib RH circuit.
DTC No. DTC Detecting Condition Trouble Area
S The airbag sensor assy center receives a short circuit to
S Front seat outer belt assy RH (P/T squib RH)
ground signal in the P/T squib RH circuit for 0.5 seconds.
B0132/61 S Airbag sensor assy center
S P/T squib RH malfunction
S Floor wire No.2
S Airbag sensor assy center malfunction
WIRING DIAGRAM
See page 05-860 .
INSPECTION PROCEDURE
1 CHECK FLOOR WIRE NO.2(P/T SQUIB RH CIRCUIT)
(a) Turn the ignition switch to the LOCK position.
Floor Wire No.2
(b) Disconnect the negative (-) terminal cable from the bat-
Airbag
tery, and wait for at least 90 seconds.
Sensor
P/T Squib RH (c) Disconnect the connectors from the airbag sensor assy
Assy
A Center center and the front seat outer belt assy RH.
(d) Measure the resistance according to the value(s) in the
D C B
table below.
P45 Standard:
Tester connection Condition Specified condition
PR+ PR- P45-1 (PR+) -
Always 1 M or Higher
Body ground
P45-2 (PR-) -
Always 1 M or Higher
Body ground
H01019
H43108 H43135 NG REPAIR OR REPLACE FLOOR WIRE NO.2
OK
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 1050
05-868
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
2 CHECK AIR BAG SENSOR ASSY CENTER
Floor Wire No.2 (a) Connect the connector to the airbag sensor assy center.
(b) Using a service wire, connect P45-1 (PR+) and P45-2
Airbag
(PR-) of connector "C".
Sensor
P/T Squib RH NOTICE:
Assy
S Twist the end of the service wire in order to insert it
Center
C
into the connector.
D
S Do not forcibly insert the twisted service wire into the
P45
terminals of the connector when connecting.
PR+ PR- (c) Connect the negative (-) terminal cable to the battery,
and wait for at least 2 seconds.
Service Wire (d) Turn the ignition switch to the ON position, and wait for at
least 60 seconds.
DTC B0132/61 (e) Clear the DTCs stored in memory (see page 05-777 ).
DLC3
(f) Turn the ignition switch to the LOCK position.
(g) Turn the ignition switch to the ON position, and wait for at
least 60 seconds.
CG (h) Check the DTCs (see page 05-777 ).
TC OK:
H01020
H43107
H10600 H01079 H43137 DTC B0132/61 is not output.
HINT:
Codes other than code B0132/61 may be output at this time, but
they are not related to this check.
NG REPLACE AIR BAG SENSOR ASSY CENTER
(SEE PAGE 60-56 )
OK
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 1051
05-869
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
3 CHECK FRONT SEAT OUTER BELT ASSY RH(P/T SQUIB RH)
(a) Turn the ignition switch to the LOCK position.
(b) Disconnect the negative (-) terminal cable from the bat-
Airbag tery, and wait for at least 90 seconds.
Sensor (c) Disconnect the service wire from connector "C".
P/T Squib RH Assy (d) Connect the connector to the front seat outer belt assy
Center RH.
DC (e) Connect the negative (-) terminal cable to the battery,
and wait for at least 2 seconds.
DTC B0132/61 (f) Turn the ignition switch to the ON position, and wait for at
DLC3
least 60 seconds.
(g) Clear the DTCs stored in memory (see page 05-777 ).
(h) Turn the ignition switch to the LOCK position.
CG TC (i) Turn the ignition switch to the ON position, and wait for at
H01021
H10600 H01079 H40053 least 60 seconds.
(j) Check the DTCs (see page 05-777 ).
OK:
DTC B0132/61 is not output.
HINT:
Codes other than code B0132/61 may be output at this time, but
they are not related to this check.
NG REPLACE FRONT SEAT OUTER BELT ASSY RH
(SEE PAGE 61-7 )
OK
USE SIMULATION METHOD TO CHECK (SEE PAGE 05-770 )
HINT:
S Perform the simulation method by selecting the check mode with the hand-held tester (see page
05-780 ).
S After selecting the check mode, perform the simulation method by wiggling each connector of the air-
bag system or driving the vehicle on a city or rough road (see page 05-780 ).
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 1052
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo