Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 04 05 21q2h73z b113524s
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download b113524s documenatation <<
Text preview - extract from the document
05-894
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM 05262-07
DTC B1135/24 HALF CONNECTION IN AIRBAG SENSOR
ASSY CENTER CONNECTORS
CIRCUIT DESCRIPTION
The airbag sensor assy center detects partial connection of connector.
DTC B1135/24 is recorded when the airbag sensor assy center detects an open in the electrical connection
check mechanism of the airbag sensor connector or in the airbag sensor circuit.
DTC No. DTC Detecting Condition Trouble Area
S Malfunction of electrical connection check mechanism of
S Electrical connection check mechanism
B1135/24 airbag sensor assy center connector
S Airbag sensor assy center
S Airbag sensor assy center malfunction
INSPECTION PROCEDURE
1 CHECK AIRBAG SENSOR ASSY CENTER CONNECTOR
(a) Turn the ignition switch to the LOCK position.
(b) Disconnect the negative (-) terminal cable from the battery, and wait for at least 90 seconds.
(c) Check the connection of the airbag sensor assy center connectors.
OK:
The connectors are connected.
HINT:
When the connectors are not firmly connected, disconnect them once and reconnect them securely.
NEXT
2 CHECK AIR BAG SENSOR ASSY CENTER
(a) Connect the negative (-) terminal cable to the battery,
and wait for at least 2 seconds.
Airbag
Sensor
(b) Turn the ignition switch to the ON position, and wait for at
Assy least 60 seconds.
Center (c) Clear the DTCs stored in memory (see page 05-777 ).
(d) Turn the ignition switch to the LOCK position.
(e) Turn the ignition switch to the ON position, and wait for at
least 60 seconds.
DLC3 DTC B1135/24 (f) Check the DTCs (see page 05-777 ).
OK:
DTC B1135/24 is not output.
HINT:
CG TC Codes other than code B1135/24 may be output at this time, but
H40997 they are not related to this check.
NG Go to step 3
OK
USE SIMULATION METHOD TO CHECK (SEE PAGE 05-770 )
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 1077
05-895
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
3 PERFORM A VISUAL CHECK OF THE DISCONNECTION DETECTION PIN
(a) Check the disconnection detection pin of the connector.
w/o Side Airbag:
Disconnection Detection Pin HINT:
Compare one connector with the other 2 connectors.
OK:
No deformation is identified.
w/ Side Airbag:
Disconnection Detection Pin
C83399
C81406 H41456 NG REPAIR OR REPLACE AIRBAG SENSOR ASSY
CENTER CONNECTOR
OK
REPLACE AIR BAG SENSOR ASSY CENTER (SEE PAGE 60-56 )
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 1078
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo