Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 04 05 21q2h73z b116785
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download b116785 documenatation <<
Text preview - extract from the document
05-971
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM 05IW5-03
DTC B1167/85 SHORT IN CURTAIN SHIELD SQUIB (LH)
CIRCUIT (TO GROUND)
CIRCUIT DESCRIPTION
The curtain shield squib LH circuit consists of the airbag sensor assy center and the curtain shield airbag
assy LH.
The circuit instructs the SRS to deploy when deployment conditions are met.
DTC B1167/85 is recorded when a short to ground is detected in the curtain shield squib LH circuit.
DTC No. DTC Detecting Condition Trouble Area
S The airbag sensor assy center receives a short circuit to
ground signal in the curtain shield squib LH circuit for 0.5 S Curtain shield airbag assy LH (Curtain shield squib LH)
B1167/85 seconds. S Airbag sensor assy center
S Curtain shield squib LH malfunction S Floor wire
S Airbag sensor assy malfunction
WIRING DIAGRAM
See page 05-964 .
INSPECTION PROCEDURE
1 CHECK FLOOR WIRE(CURTAIN SHIELD SQUIB LH CIRCUIT)
(a) Turn the ignition switch to the LOCK position.
Curtain Shield Floor Wire (b) Disconnect the negative (-) terminal cable from the bat-
Squib LH tery, and wait for at least 90 seconds.
A Airbag (c) Disconnect the connectors from the airbag sensor assy
D C B Sensor
center and the curtain shield airbag assy LH.
Assy
(d) Measure the resistance according to the value(s) in the
Center
C14 table below.
Standard:
ICL+ ICL- Tester connection Condition Specified condition
C14-1 (ICL+) -
Always 1 M or Higher
Body ground
C14-2 (ICL-) -
Always 1 M or Higher
Body ground
H41469 H43069 NG REPAIR OR REPLACE FLOOR WIRE
OK
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 1154
05-972
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
2 CHECK AIR BAG SENSOR ASSY CENTER
(a) Connect the connector to the airbag sensor assy center.
Floor Wire
Curtain Shield (b) Using a service wire, connect C14-1 (ICL+) and C14-2
Squib LH (ICL-) of connector "C".
Airbag NOTICE:
D C Sensor S Twist the end of the service wire in order to insert it
C14 Assy into the connector.
ICL+ Center S Do not forcibly insert the twisted service wire into the
terminals of the connector when connecting.
ICL-
(c) Connect the negative (-) terminal cable to the battery,
Service Wire and wait for at least 2 seconds.
(d) Turn the ignition switch to the ON position, and wait for at
least 60 seconds.
DTC B1167/85 (e) Clear the DTCs stored in memory (see page 05-777 ).
DLC3
(f) Turn the ignition switch to the LOCK position.
(g) Turn the ignition switch to the ON position, and wait for at
least 60 seconds.
CG TC (h) Check the DTCs (see page 05-777 ).
H01017 OK:
C89252
H10600 H11646 H42135 DTC B1167/85 is not output.
HINT:
Codes other than code B1167/85 may be output at this time, but
they are not related to this check.
NG REPLACE AIR BAG SENSOR ASSY CENTER
(SEE PAGE 60-56 )
OK
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 1155
05-973
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
3 CHECK CURTAIN SHIELD AIR BAG ASSY LH(CURTAIN SHIELD SQUIB LH)
(a) Turn the ignition switch to the LOCK position.
Curtain Shield (b) Disconnect the negative (-) terminal cable from the bat-
Squib LH tery, and wait for at least 90 seconds.
(c) Disconnect the service wire from connector "C".
Airbag
(d) Connect the connector to the curtain shield airbag assy
DC Sensor
Assy LH.
Center (e) Connect the negative (-) terminal cable to the battery,
and wait for at least 2 seconds.
DLC3 (f) Turn the ignition switch to the ON position, and wait for at
DTC B1167/85 least 60 seconds.
(g) Clear the DTCs stored in memory (see page 05-777 ).
(h) Turn the ignition switch to the LOCK position.
CG TC (i) Turn the ignition switch to the ON position, and wait for at
H01018
H10600 H11646 H40947 least 60 seconds.
(j) Check the DTCs (see page 05-777 ).
OK:
DTC B1167/85 is not output.
HINT:
Codes other than code B1167/85 may be output at this time, but
they are not related to this check.
NG REPLACE CURTAIN SHIELD AIR BAG ASSY LH
(SEE PAGE 60-40 )
OK
USE SIMULATION METHOD TO CHECK (SEE PAGE 05-770 )
HINT:
S Perform the simulation method by selecting the check mode with the hand-held tester (see page
05-780 ).
S After selecting the check mode, perform the simulation method by wiggling each connector of the air-
bag system or driving the vehicle on a city or rough road (see page 05-780 ).
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 1156
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo