Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 04 05 21q2h73z precaud4

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download precaud4 documenatation <<

Text preview - extract from the document

05-758
                                       DIAGNOSTICS   -   SUPPLEMENTAL RESTRAINT SYSTEM


SUPPLEMENTAL RESTRAINT SYSTEM
                                                                                                      05IV0-04


PRECAUTION
1.     HANDLING PRECAUTIONS AIRBAG SENSOR
HINT:
In this section, the airbag sensor assy center, airbag sensor front LH, airbag sensor front RH, side airbag
sensor assy LH, side airbag sensor assy RH, airbag sensor rear LH, airbag sensor rear RH and seat position
airbag sensor are collectively referred to as the airbag sensor.
(a) Before starting the following operations, wait at least 90 seconds after disconnecting the negative (-)
       terminal of the battery:
       (1) Replacement of the airbag sensor.
       (2) Adjustment of the front/rear door of the vehicle equipped with the side airbag and curtain shield
              airbag (fitting adjustment).
(b) When connecting or disconnecting the airbag sensor connector, ensure that all of the sensors are
       installed in the vehicle.
(c) Do not use an airbag sensor which has been dropped during the operation or transportation.
(d) Do not disassemble the airbag sensor.
2.     INSPECTION PROCEDURE FOR VEHICLE INVOLVED IN ACCIDENT
(a) When the airbag has not deployed, confirm the DTC by checking the SRS warning light. If there is any
       malfunction in the SRS airbag system, perform troubleshooting.
(b) When any of the airbags have deployed, replace the airbag sensor and check the installation condition.
(c) Perform the zero point calibration and sensitivity check if any of the following conditions occur.
        S     The occupant classification ECU is replaced.
        S     Accessories (seatback tray and seat cover, etc.) are installed.
        S     The passenger seat is removed from the vehicle.
        S     The passenger airbag ON/OFF indicator ("OFF") comes on when the passenger seat is not occu-
              pied.
        S     The vehicle is brought to the workshop for repair due to an accident or collision.
NOTICE:
When an accident vehicle is brought into the workshop for repair, check the flatness of the body side
that is equipped with the passenger seat. If the flatness is not within " 3.0 mm (0.118 in.), adjust it
to the specified range (within " 3.0 mm (0.118 in.)).




 2005 SIENNA REPAIR MANUAL (RM1163U)

                                                               Author :            Date :               941

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo