Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 04 01 20547 intrlo40
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download intrlo40 documenatation <<
Text preview - extract from the document
01-22
INTRODUCTION - REPAIR INSTRUCTION
010L2-01
VEHICLE LIFT AND SUPPORT LOCATIONS
2WD
Jacking Up Bracket
Rear Axle Beam
Front
JACK POSITION
Front Front suspension member
Rear Jacking up bracket
CAUTION : When jacking up the front and rear, make sure the vehicle is
not carrying any extra weight.
NOTICE :
Do not jack up at the center of the rear axle beam. If the vehicle is lifted
at the center of the rear axle beam, the rear axle beam will be damaged.
PANTOGRAPH JACK POSITION
SUPPORT POSITION
Safety stand and swing arm type lift
D30725
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 22
01-23
INTRODUCTION - REPAIR INSTRUCTION
4WD
Rear Axle Beam
Transaxle Support
Front
JACK POSITION
Front Front suspension member and/or transaxle support
Rear Rear differential support
CAUTION : When jacking up the front and rear, make sure the vehicle is
not carrying any extra weight.
NOTICE :
Do not jack up at the center of the rear axle beam. If the vehicle is lifted
at the center of the rear axle beam, the rear axle beam will be damaged.
PANTOGRAPH JACK POSITION
SUPPORT POSITION
Safety stand and swing arm type lift
D30726
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 23
01-24
INTRODUCTION - REPAIR INSTRUCTION
Plate Type Lift
L
B
Attachment
A C
NOTICE:
Set the rear side attachment so that it is behind the parting line between
front door and sliding door.
HINT:
Left and right set position Place the vehicle over the center of the lift.
Front and rear set position D Align the cushion gum ends of the plate
with the attachment lower ends (A, C).
D Align the attachment upper end (B) with the
front jack supporting point (L).
Attachment dimensions
85 mm (3.35 in.)
70 mm (2.76 in.)
100 mm (3.94 in.)
200 mm (7.87 in.)
D30724
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 24
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo