Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 04 29 2041ol02 x040001

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download x040001 documenatation <<

Text preview - extract from the document

                                         DIFFERENTIAL   -   REAR DIFFERENTIAL SIDE GEAR SHAFT               29-31
                                                            BOLT (4WD)


REAR DIFFERENTIAL SIDE GEAR SHAFT BOLT (4WD)
                                                                                                             29012-02


REPLACEMENT
1.    REMOVE REAR WHEEL
2.    REMOVE EXHAUST PIPE ASSY (See page 15-6 )
HINT:
Perform this procedure only when removing the RH side.
3.    REMOVE SPEED SENSOR REAR LH (See page 30-32 )
4.    REMOVE REAR AXLE SHAFT LH NUT (See page 30-32 )
      SST 09930-00010
5.    REMOVE REAR DRIVE SHAFT ASSY LH (See page 30-32 )




              SST                               6.    REMOVE REAR DIFFERENTIAL SIDE GEAR SHAFT
                                                      BOLT
                                                (a)   Using SST and wood block, remove the rear differential
                               wood block
                                                      side gear shaft bolt.
                                                      SST 09611-12010



C82659
                                       G24195




     wood block
                                                7.    INSTALL REAR DIFFERENTIAL SIDE GEAR SHAFT
                                                      BOLT
                                                (a)   Install the bolt tightening the nut through the plate washer.




C82658                                 G24196



8.       INSTALL REAR DRIVE SHAFT ASSY LH (See page 30-32 )
9.       INSTALL REAR AXLE SHAFT LH NUT (See page 30-32 )
         SST 09930-00010
10.      INSTALL SPEED SENSOR REAR LH (See page 30-32 )
11.      INSTALL EXHAUST PIPE ASSY (See page 15-6 )
HINT:
Perform this procedure only when installing the RH side.
12. INSTALL REAR WHEEL
      Torque: 103 Nm (1,050 kgfcm, 76 ftlbf)
13. CHECK FOR EXHAUST GAS LEAKS
HINT:
Perform this procedure only when installing the RH side.
14. INSPECT AND ADJUST REAR WHEEL ALIGNMENT (See page 27-4 )
15. CHECK ABS SPEED SENSOR SIGNAL
(a) ABS WITH EBD & BA & TRAC & VSC SYSTEM (See page 05-435 )
 2005 SIENNA REPAIR MANUAL (RM1163U)

                                                                  Author :              Date :               2662

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo