Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 04 31 20414l02 precaud4

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download precaud4 documenatation <<

Text preview - extract from the document

                                                                                                31-1
                                      TRANSFER   -   TRANSFER SYSTEM (4WD)


TRANSFER SYSTEM (4WD)
                                                                                               3100Q-02


PRECAUTION
S   Before disassembly, clean the transfer assy and remove any deposited sand or mud to prevent
    it from entering the inside of the transfer during disassembly and assembly.
S   When removing any light alloy part such as a transfer cover, do not pry it off with a tool like a
    screwdriver but tap it out with a plastic hammer.
S   Always organize the removed parts properly and protect them from dust.
S   Before installation, clean all parts and dry them completely and then, apply hypoid gear oil to
    each part. Do not use alkaline chemicals when cleaning aluminum or rubber parts and ring gear
    set bolts. Also, do not use any cleansing oil (ex. white gasoline) to clean the rubber parts such
    as O rings and oil seals.
S   Apply hypoid gear oil to any sliding surface or rotating part.
S   Do not directly hold a part by a vise. Make sure that you put an aluminum sheet between them.
S   Replace any damaged or deformed snap ring with a new one.
S   If there is a scratch on the mating surface of the case, it may cause oil leakage. Therefore, be
    careful not to damage the contact surface when handling it.
S   Before applying a sealant, completely remove old sealant stuck on sealed parts and clean them
    with white gasoline.
S   Do not supply oil immediately after installing sealed parts. Leave 1 hour or more.
S   Scratches on a contact surface of an oil seal, O ring or gasket may cause oil leakage. Be careful
    not to damage the contact surface when handling it.
S   When press-fitting an oil seal, be careful not to damage the oil seal lip and its periphery.
S   When replacing a bearing , replace both outer and inner races as one set.




2005 SIENNA REPAIR MANUAL (RM1163U)

                                                           Author :          Date :            2714

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo