Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 04 31 20418l02 x040001

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download x040001 documenatation <<

Text preview - extract from the document

31-8                                              TRANSFER   -   TRANSFER EXTENSION HOUSING TYPE T OIL
                                                                 SEAL (4WD)


TRANSFER EXTENSION HOUSING TYPE T OIL SEAL (4WD)
                                                                                                           3100V-05


REPLACEMENT
HINT:
COMPONENTS: See page 31-3
1.    REMOVE TRANSFER CASE NO.1 PLUG
2.    REMOVE TRANSFER DRAIN PLUG
(a) Remove the drain plug, gasket and drain transfer oil.
3.    REMOVE EXHAUST PIPE ASSY (See page 15-6 )
4.    REMOVE PROPELLER W/CENTER BEARING SHAFT ASSY (See page 30-6 )




                     SST                           5.   REMOVE TRANSFER EXTENSION HOUSING TYPE T
                                                        OIL SEAL
                                                   (a) Using SST, remove the oil seal from the extension hous-
                                                        ing.
                                                        SST 09308-00010
                                                   NOTICE:
                                                   Be careful not to damage the oil-seal-fitted surface and the
                                                   inside surface of the bush.
 C52790
                                         C83632



                                                   6.  INSTALL TRANSFER EXTENSION HOUSING TYPE T
                                     SST               OIL SEAL
                                                   (a) Using SST, drive a new oil seal into the extension housing
                                                       to the position shown in the illustration.
                                                       SST 09325-20010
                                                   NOTICE:
                         1.1 - 1.9 mm              Do not install the oil seal obliquely.
                         (0.043 - 0.075 in.)       (b) Apply small amount of MP grease to the oil seal lip.
  C52791
                                         C83633



7.  TEMPORARILY TIGHTEN PROPELLER W/CENTER BEARING SHAFT ASSY (See page 30-6 )
8.  FULLY TIGHTEN PROPELLER W/CENTER BEARING SHAFT ASSY (See page 30-6 )
9.  INSTALL EXHAUST PIPE ASSY (See page 15-6 )
10. INSTALL TRANSFER DRAIN PLUG
(a) Install the drain plug with a new gasket.
    Torque: 49 Nm (500 kgfcm, 36 ftlbf)
11. INSTALL TRANSFER CASE NO.1 PLUG
(a) Supply oil up to the level 0 - 5 mm (0 - 0.20 in.) below the lowest end of the plug hole.
    Oil quantity: 0.9 L (0.95 US qts, 0.71 lmp.qts)
NOTICE:
When supplying oil, fill it slowly.
(b) Install the No. 1 plug with a new gasket.
    Torque: 49 Nm (500 kgfcm, 36 ftlbf)


2005 SIENNA REPAIR MANUAL (RM1163U)

                                                                        Author :            Date :           2721

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo