Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 04 32 2042g70t onvein40

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document
onvein40


>> Download onvein40 documenatation <<

Text preview - extract from the document
32-42
                                           BRAKE   -   BRAKE ACTUATOR ASSY (W/O VSC)


BRAKE ACTUATOR ASSY (W/O VSC)
                                                                                                3203J-06


ON-VEHICLE INSPECTION
1.     CONNECT HAND-HELD TESTER
(a) Connect the hand-held tester to the DLC3.
(b) Start the engine and run it at idle.
(c) Select the ACTIVE TEST mode on the hand-held tester.
HINT:
Please refer to the hand-held tester operator's manual for further details.
2.     INSPECT ACTUATOR MOTOR OPERATION
(a) With the motor relay ON, check the actuator motor operation noise.
(b) Turn the motor relay OFF.
(c) Depress the brake pedal and hold it for about 15 seconds. Check that the brake pedal cannot be de-
       pressed.
(d) With the motor relay ON, check that the pedal does not pulsate.
NOTICE:
Do not keep the motor relay ON for more than 5 seconds continuously. When operating it continuous-
ly, set the interval of more than 20 seconds.
(e) Turn the motor relay OFF and release the brake pedal.
3.     INSPECT RIGHT FRONT WHEEL OPERATION
NOTICE:
Never turn ON the solenoid which is not described below.
(a) With the brake pedal depressed, perform the following operations.
(b) Turn the SFRH and SFRR solenoid ON simultaneously, and check that the pedal cannot be depressed.
NOTICE:
Do not keep the solenoids ON for more than 5 seconds continuously. When operating them continu-
ously, set the interval of more than 20 seconds.
(c) Turn the SFRH and SFRR solenoid OFF simultaneously, and check that the pedal can be depressed.
(d) Turn the motor relay ON, and check that the pedal returns.
NOTICE:
Do not keep the motor relay ON for more than 5 seconds continuously. When operating it continuous-
ly, set the interval of more than 20 seconds.
(e) Turn the motor relay OFF and release the brake pedal.
4.     INSPECT OTHER WHEEL OPERATION
(a) Using the same procedure, check the solenoids of other wheels.
HINT:
Left front wheel: SFLH, SFLR
Right rear wheel: SRRH, SRRR
Left rear wheel: SRLH, SRLR




2005 SIENNA REPAIR MANUAL (RM1163U)

                                                              Author :            Date :          2790



◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo