Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 04 40 20twhe1y x040001
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download x040001 documenatation <<
Text preview - extract from the document
40-32
AUTOMATIC TRANSMISSION / TRANS - FRONT DIFFERENTIAL OIL SEAL (U151F)
FRONT DIFFERENTIAL OIL SEAL (U151F)
4011H-02
REPLACEMENT
HINT:
When replacing the front differential oil seal (LH) or (RH), perform step 1 to 13 or 14 to 27 respectively.
1. REMOVE FRONT WHEEL
2. REMOVE ENGINE UNDER COVER NO.1
3. DRAIN AUTOMATIC TRANSAXLE FLUID
(a) Remove the drain plug, gasket and drain ATF.
(b) Install a new gasket and drain plug.
Torque: 49 Nm (500 kgfcm, 36 ftlbf)
4. REMOVE FRONT DRIVE SHAFT ASSY LH (See page 30-18 )
5. REMOVE DIFFERENTIAL SIDE BEARING RETAINER
SST OIL SEAL
(a) Using SST, pull out the oil seal.
SST 09308-00010
D25832
6. INSTALL DIFFERENTIAL SIDE BEARING RETAINER
OIL SEAL
(a) Using SST and a hammer, drive in a new oil seal.
SST 09223-15020, 09950-70010 (09951-07150)
Oil seal drive in depth:
0 " 0.5 mm (0 " 0.020 in.)
(b) Coat the lip of the oil seal with MP grease.
SST
D25834
7. INSTALL FRONT DRIVE SHAFT ASSY LH (See page 30-18 )
8. INSTALL ENGINE UNDER COVER NO.1
9. INSTALL FRONT WHEEL
Torque: 103 Nm (1,050 kgfcm, 76 ftlbf)
10. ADD AUTOMATIC TRANSAXLE FLUID
11. INSPECT AUTOMATIC TRANSAXLE FLUID (See page 40-2 )
12. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT (See page 26-7 )
13. CHECK ABS SPEED SENSOR SIGNAL
(a) ABS WITH EBD & BA &TRAC VSC & SYSTEM (See pege 05-435 )
14. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE (See page 14-33 )
15. REMOVE FRONT DRIVE SHAFT ASSY LH (See page 30-18 )
16. REMOVE FRONT DRIVE SHAFT ASSY RH (See page 30-18 )
17. REMOVE TRANSFER STIFFENER PLATE RH (See page 40-9 )
18. REMOVE AUTOMATIC TRANSMISSION W/TRANSFER (See page 40-9 )
19. REMOVE TRANSFER ASSY (See page 31-9 )
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 2856
40-33
AUTOMATIC TRANSMISSION / TRANS - FRONT DIFFERENTIAL OIL SEAL (U151F)
20. REMOVE TRANSAXLE HOUSING OIL SEAL
(a) Using a screw driver with vinyl tape wound around its tip,
remove the oil seal.
NOTICE:
Be careful not to damage the housing.
D30693
21. INSTALL TRANSAXLE HOUSING OIL SEAL
A (a) Using SST and a hammer, drive in a new oil seal.
Oil seal drive in depth:
6.0 " 0.5 mm (0.236 " 0.020 in.)
(b) Coat the lip of the oil seal with MP grease.
SST 09649-17010, 09950-70010 (09951-07200)
SST
D30913
22. INSTALL TRANSFER ASSY (See page 31-9 )
23. INSTALL AUTOMATIC TRANSMISSION W/TRANSFER (See page 40-9 )
24. INSTALL TRANSFER STIFFENER PLATE RH (See page 40-9 )
25. INSTALL FRONT DRIVE SHAFT ASSY RH (See page 30-18 )
26. INSTALL FRONT DRIVE SHAFT ASSY LH (See page 30-18 )
27. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE (See page 14-33 )
SST 09670-00010
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 2857
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo