Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 04 71 20o7e onvein40
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download onvein40 documenatation <<
Text preview - extract from the document
71-4
INSTRUMENT PANEL/METER - COMBINATION METER
710FS-01
ON-VEHICLE INSPECTION
1. INSPECT SPEEDOMETER
(a) Check the operation.
(1) Using a speedometer tester, inspect the speedometer for acceptable indication error and check
the operation of the odometer.
Reference: km/h (Canade)
Standard indication Acceptable range
20 km/h 17.5 - 21.5 km/h
40 km/h 38.0 - 42.0 km/h
60 km/h 58.0 - 63.0 km/h
80 km/h 78.0 - 84.0 km/h
100 km/h 98.5 - 104.5 km/h
120 km/h 119.0 - 125.0 km/h
140 km/h 139.0 - 146.0 km/h
160 km/h 159.0 - 167.0 km/h
Reference: MPH (U.S.)
Standard indication Acceptable range
20 mph 20.0 - 23.0 mph
40 mph 40.0 - 43.5 mph
60 mph 60.0 - 64.0 mph
80 mph 80.0 - 84.5 mph
100 mph 100.0 - 105.0 mph
NOTICE:
Tire wear and over or under inflation will affect the indication error.
(2) Check the deflection width of the speed meter indicator.
Reference: Below 0.5 km/h (0.3 mph)
2. INSPECT OUTPUT SIGNAL OF VEHICLE SPEED
(a) Check for the signal.
(1) While driving the vehicle at the speed of 10 km/h,
check the voltage between the terminal C10-36 of
the combination meter assy and the body ground.
Standard: Fluctuation between 10 to 14 V or less is re-
peated 7 times within 1 sec.
NOTICE:
C10-36 I34622 Check it with the ignition switch ON and the connector con-
nected.
3. INSPECT TACHOMETER
(a) Check the operation
(1) Connect the tune-up test tachometer, and start the engine.
NOTICE:
S Reversing the connection of the tachometer will damage the transistors and the insides of the
diodes.
S When removing or installing the tachometer, be careful not to drop or subject it to heavy
shocks.
(2) Compare the result of the test with standard indication.
DC 13.5 V, 25 _C at (77 _F)
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 3229
71-5
INSTRUMENT PANEL/METER - COMBINATION METER
Acceptable range (r/min)
Standard indication (r/min)
Data in ( ) are for reference
700 630 - 770
1,000 (900 - 1100)
2,000 (1850 - 2150)
3,000 2800 - 3200
4,000 (3800 - 4200)
5,000 4800 - 5200
6,000 (5750 - 6250)
7,000 6700 - 7300
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 3230
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo