Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 04 72 20uce w040001
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download w040001 documenatation <<
Text preview - extract from the document
72-54
SEAT - REAR NO. 2 SEAT ASSEMBLY RH
720IT-02
OVERHAUL
HINT:
The installation is in the reverse order of the removal. However, when there is a special point concerning
the installation, it is indicated.
1. REMOVE REAR SEAT LEG SIDE GARNISH
SUB-ASSY RH
(a) Disengage the clips and remove the seat leg side garnish.
Clip
B67130
2. REMOVE REAR NO. 2 SEAT ASSY RH
(a) Remove the bolt and locus cable.
(b) Remove the 2 bolts and seat.
(c) Remove the seat headrest.
3. REMOVE RH SEAT REAR SEAT RECLINING COVER
Claw (a) Remove the 2 screws.
(b) Remove the reclining cover by pulling it out in the arrow
mark direction shown in the illustration.
B67465
4. REMOVE LH SEAT REAR SEAT RECLINING COVER
Claw (a) Remove the 2 screws.
(b) Remove the reclining cover by pulling it out in the arrow
mark direction shown in the illustration.
B67464
5. REMOVE REAR SEATBACK ASSY RH
(a) Disengage the reclining remote control cable.
(b) Disengage the rear seat lock release strap cable.
(c) Remove the 4 bolts and seatback.
6. REMOVE REAR NO.2 SEAT BELT ASSY INNER RH
(a) Remove the bolt and seat belt.
7. REMOVE RR SEAT COVER BEZEL NO.2
(a) Remove the 3 screws and cover bezel.
8. REMOVE NO. 2 SEATBACK LOCK CONTROL BEZEL
(a) Remove the screw and lock control bezel.
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 3300
72-55
SEAT - REAR NO. 2 SEAT ASSEMBLY RH
9. REMOVE NO. 2 SEATBACK COVER RH
(a) Disengage the claw and remove the 2 headrest supports.
(b) Remove the hog rings and seatback cover together with
the pad.
(c) Remove the hog rings and seatback cover.
B60977
10. REMOVE REAR SEAT LOCK RELEASE STRAP ASSY
(a) Remove the nut and lock release strap.
B67127
11. REMOVE REAR SEATBACK CONNECTING RH WIRE
(a) Remove the nut and seatback connecting wire.
12. REMOVE RECLINING RELEASE HANDLE SUB-ASSY RH
(a) Remove the screw and reclining release handle.
13. REMOVE RECLINING ADJUSTER RELEASE HANDLE NO.2 RH
(a) Remove the nut and reclining adjuster release handle.
14. REMOVE NO.2 SEAT CUSHION COVER SUB-ASSY RH
(a) Remove the hog rings and cushion cover together with the pad.
(b) Remove the hog rings and seat cushion cover.
15. REMOVE LOCUS CABLE RH
(a) Remove the nut and locus cabel.
16. REMOVE NO.2 SEAT CUSHION SPRING ASSY RH
17. REMOVE REAR SEAT STAY SUB-ASSY
(a) Remove the nut and seat stay.
18. INSTALL REAR SEAT STAY SUB-ASSY
(a) Install the seat stay with the nut.
Torque: 5.5 Nm (56 kgfcm, 49 in.lbf)
19. INSTALL LOCUS CABLE RH
(a) Install the locus cabel with the nut.
Torque: 5.5 Nm (56 kgfcm, 49 in.lbf)
20. INSTALL NO.2 SEAT CUSHION COVER SUB-ASSY
Hog Ring Pliers RH
(a) Using hog ring pliers, install the seat cushion cover to the
seat cushion pad with new hog rings.
NOTICE:
S Be careful not to damage the cover.
S When installing the hog rings, take care to prevent
wrinkles as much as possible.
B50126
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 3301
72-56
SEAT - REAR NO. 2 SEAT ASSEMBLY RH
21. INSTALL REAR SEAT LOCK RELEASE STRAP ASSY
(a) Install the lock release strap with the nut.
Torque: 5.5 Nm (56 kgfcm, 49 in.lbf)
22. INSTALL RECLINING ADJUSTER RELEASE HANDLE NO.2 RH
(a) Install the reclining release handle with the nut.
Torque: 5.5 Nm (56 kgfcm, 49 in.lbf)
23. INSTALL RECLINING RELEASE HANDLE SUB-ASSY RH
(a) Install the reclining adjuster release handle with the nut.
Torque: 5.5 Nm (56 kgfcm, 49 in.lbf)
24. INSTALL REAR SEAT LOCK RELEASE STRAP ASSY
(a) Install the lock release strap with the nut.
Torque: 5.5 Nm (56 kgfcm, 49 in.lbf)
25. INSTALL NO. 2 SEATBACK COVER RH
Hog Ring Pliers (a) Using hog ring pliers, install the seatback cover to the
seatback pad with new hog rings.
NOTICE:
S Be careful not to damage the cover.
S When installing the hog rings, take care to prevent
wrinkles as much as possible.
(b) Install the 2 headrest supports.
B50126
26. INSTALL REAR NO.2 SEAT BELT ASSY INNER RH
(a) Install the seat belt with the bolt.
Torque: 42 Nm (428 kgfcm, 31 ftlbf)
27. INSTALL REAR SEATBACK ASSY RH
(a) Install the seatback with the bolt.
Torque: 44 Nm (449 kgfcm, 32 ftlbf)
28. INSTALL REAR NO. 2 SEAT ASSY RH
(a) Place the seat in the cabin.
NOTICE:
Be careful not to damage the body.
(b) Install the seat with the bolt.
Torque: 29 Nm (296 kgfcm, 21 ftlbf)
(c) Install the locus cable with the bolt.
Torque: 29 Nm (296 kgfcm, 21 ftlbf)
(d) Install the 2 headrests.
HINT:
Check that the seat leg locks.
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 3302
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo