Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 04 73 20mtn onvein40
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download onvein40 documenatation <<
Text preview - extract from the document
73-1 1
THEFT DETERRENT & DOOR LOCK - WIRELESS DOOR LOCK CONTROL SYSTEM
730E6-02
ON-VEHICLE INSPECTION
1. CHECK WIRELESS REMOTE CONTROL FUNCTIONS
HINT:
S The switch described in this text is a switch for transmitting signals, which is built into the door control
transmitter.
S All the functions listed below must be checked in the remote control operational area.
(a) Put the vehicle under the conditions that allow the wireless control function to be operated (See PRE-
CAUTION on page 73-9 ).
(b) Check the basic function.
(1) Check that all the doors lock when the LOCK switch is pressed.
(2) Check that only the driver side door unlocks when the UNLOCK switch is pressed once and the
other doors unlock when the UNLOCK switch is pressed again within 3 seconds.
(3) Check that the power slide door opens or closes when the power slide door switch is held down
for 0.8 seconds or more.
(4) Check that the power slide door reverses right when the power slide door switch is pressed while
the door is automatically moving (no delay).
(5) Check that the power back door opens or closes when the power back door switch is held down
for 0.8 seconds or more.
(6) Check that the power back door reverses right when the back door switch is pressed while the
door is automatically moving (no delay).
(7) Check that all the power windows close when the LOCK switch is held down for 2.4 seconds and
they stop operation when the switch is released (manual operation).
(8) Check that all the power windows open when the UNLOCK switch is held down for 2.4 seconds
and they stop operation when the switch is released (manual operation).
(c) Check the chattering prevention function.
(1) Check that the corresponding operation occurs only once and is not repeated continuously while
the switch is held. However, when the switch is operated repeatedly at 1 second intervals, check
that the corresponding operation is carried out.
(d) Check the automatic locking function.
(1) Check that all the doors lock automatically as long as none of the doors have been opened or
all the doors have not been locked within approximately 30 seconds after all the doors are un-
locked by pressing the UNLOCK switch.
(2) Check that the automatic locking function does not operate when any door has been opened or
all the doors have been locked within approximately 30 seconds after all the doors are unlocked
by pressing the UNLOCK switch.
(e) Check the switch operation fail-safe function.
(1) Check that the doors can not be locked by the switch while the key is in the ignition key cylinder.
However, this does not apply when the system is in the recognition code registration mode.
(f) Check the operation stop function when a door is open or not completely closed.
(1) Check that the doors are not locked by the switch while any door is open or not completely closed
and the wireless door lock buzzer sounds for 10 seconds.
(g) Check the repeat function.
(1) Check that all the doors attempt to automatically lock once again 1 second after the LOCK switch
has been pressed while the movement of the driver side door control knob, which is in the un-
locked state, is being restricted.
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 3319
73-12
THEFT DETERRENT & DOOR LOCK - WIRELESS DOOR LOCK CONTROL SYSTEM
(h) Check the hazard warning lamps flashing and warning buzzer sounding functions (answer-back).
(1) When the LOCK switch is pressed, check that the lamps flash once and the buzzer sounds once,
simultaneously with the locking operation of all the doors.
(2) When the UNLOCK switch is pressed once, check that the lamps flash twice and the buzzer
sounds twice, simultaneously with the unlocking operation of the driver side door.
(3) When the UNLOCK switch is pressed again within 3 seconds, check that the lamps flash twice
and the buzzer sounds twice, simultaneously with the unlocking operation of all the doors.
(4) When the LOCK switch is held down for 2.4 seconds, check that the buzzer sounds once and
all the power windows start closing operation.
(5) When the UNLOCK switch is held down for 2.4 seconds, check that the buzzer sounds once and
all the power windows start opening operation.
(6) When the power back door switch is held down for 0.8 seconds or more, check that the lamps
flash twice and the buzzer sounds twice, simultaneously with the operation of the power back
door.
(i) Check the remote panic function.
(1) Check that the horn sounds, the headlights and taillights flash and the interior light remains on
(when the light switch is turned to the DOOR position) for 60 seconds by the theft alarm function,
when the PANIC switch is held down for 0.8 seconds or more. Also, check that the horn stops
sounding and the lights stop flashing when either switch of the transmitter is pressed.
2. CHECK DOOR CONTROL RECEIVER
Wire Harness Side
(a) Disconnect the receiver connector.
(b) Check the voltage and resistance between the terminals
of the wire harness side connector and the receiver and
the body ground.
Door Control Receiver
B59092
Standard:
Terminal No. Condition Specified Condition
5 (+B) - Body ground Constant 10 to 14 V
1 (GND) - Body ground Constant Below 1
If the result is not as specified, there may be a malfunction on the wire harness side.
(c) Reconnect the connector and check the voltage between the terminal and body ground.
Standard:
Terminal No. Condition Specified Condition
No key in ignition key cylinder, all doors closed
2 (RDA) - Body ground Below 1 V Approx. 6 to 7 V Below 1 V
and each transmitter switch OFF ON
If the result is not as specified, the receiver may have a malfunction.
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 3320
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo