Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 05 20g4b onvein40

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document
onvein40


>> Download onvein40 documenatation <<

Text preview - extract from the document
                                                                                                         10-1
                             ENGINE CONTROL SYSTEM    -   SFI SYSTEM


SFI SYSTEM
                                                                                                        1006Q-04


ON-VEHICLE INSPECTION
1.    INSPECTION THROTTLE BODY
(a)   Listen to the throttle control motor operating sound.
      (1) Turn the ignition switch ON.
      (2) When turning the accelerator pedal position sensor lever, check the running sound of the motor.
            Also, check that there is no friction noise.
(b)   Inspect the throttle position sensor.
      (1) Connect the hand-held tester or OBD II scan tool to the DLC3.
      (2) Turn the ignition switch ON.
      (3) Check that the MIL does not illuminate.
      (4) Check that the throttle valve opening percentage (THROTTLE POS) in the DATA LIST shows
            the standard value.
      Standard throttle valve opening percentage: 60 % or more
2.    INSPECT ACCELERATOR PEDAL POSITION SENSOR
(a)   After turning ignition switch ON, check the DATA LIST and verify that the throttle position sensor volt-
      age is within specifications.
      Standard voltage: 0.6 to 1.0 V
3.    INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSY
(a)   Connect the hand-held tester or OBD II scan tool to the DLC3.
(b)   Turn the ignition switch ON.
(c)   Start the engine and let it warms up.
(d)   Connect the hand-held tester and select the VVT from the ACTIVE TEST menu.
(e)   Monitor the engine speed when the OCV is operated with the hand-held tester.
      Standard:
      VVT system is OFF (OCV is OFF): Normal engine speed
      VVT system is ON (OCV is ON): Rough idle or engine stalled




 2005 SIENNA REPAIR MANUAL (RM1163U)

                                                                Author :            Date :              2232



◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo