Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 05 20um1 x040001
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download x040001 documenatation <<
Text preview - extract from the document
10-7
ENGINE CONTROL SYSTEM - THROTTLE BODY ASSY
100F2-03
REPLACEMENT
1. DRAIN ENGINE COOLANT (See page 16-8 )
2. REMOVE V-BANK COVER SUB-ASSY
(a) Using a socket hexagon wrench 5, remove the 3 nuts.
(b) Remove the V-bank cover.
A81624
(c) (c) 3. REMOVE AIR CLEANER CAP SUB-ASSY
(a) Disconnect the mass air flow meter connector.
(d)(f) (b) Disconnect the 3 vacuum hoses.
(a)
(b) (c) Remove the fuel vapor feed hose from the 2 hose clamps.
(e)
(d) Disconnect the ventilation hose.
(b) (e) Loosen the 2 air cleaner cap bolts.
(e)
(b) (f) Loosen the hose clamp bolt and remove the air cleaner
cap together with the air cleaner hose No. 1.
A81627 (g) Remove the air cleaner filter element.
4. REMOVE THROTTLE BODY ASSY
(a) Disconnect the throttle motor connector.
(b) Disconnect the water by-pass hose No. 2.
(c) Disconnect the water by-pass hose No. 3.
(b) (a)
(c)
A81197
(d) Remove the 2 bolts, the 2 nuts and the throttle body.
(e) Remove the gasket from the intake air connector.
A81198
5. INSTALL THROTTLE BODY ASSY
(a) Install a new gasket to the intake air connector.
(b) Install the throttle body with the 2 bolts and the 2 nuts.
Torque: 11 Nm (112 kgfcm, 8 ftlbf)
(c) Connect the water by-pass hose No. 3.
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 2238
10-8
ENGINE CONTROL SYSTEM - THROTTLE BODY ASSY
(d) Connect the water by-pass hose No. 2.
(e) Connect the throttle motor connector.
6. INSTALL AIR CLEANER CAP SUB-ASSY
Torque: 5.0 Nm (51 kgfcm, 44 in.lbf)
7. ADD ENGINE COOLANT (See page 16-8 )
8. CHECK FOR ENGINE COOLANT LEAKS (See page 16-1 )
9. INSTALL V-BANK COVER SUB-ASSY
(a) Fit the 2 retainers and install the V-bank cover.
(b) Using a socket hexagon wrench 5, tighten the 3 nuts.
Torque: 7.9 Nm (81 kgfcm, 70 in.lbf)
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 2239
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo