Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 09 203eu a040001
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download a040001 documenatation <<
Text preview - extract from the document
14-7
ENGINE MECHANICAL - VALVE CLEARANCE
VALVE CLEARANCE
141AK-04
ADJUSTMENT
1. DRAIN COOLANT (See page 66-8 )
2. REMOVE FRONT WIPER ARM HEAD CAP
3. REMOVE FR WIPER ARM RH (See page 66-8 )
4. REMOVE FR WIPER ARM LH (See page 66-8 )
5. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSY (See page 66-8 )
6. REMOVE WIPER LINK ASSY (See page 66-8 )
7. REMOVE COWL TOP TO COWL BRACE INNER NO.1 (See page 11-13 )
8. REMOVE COWL TOP PANEL SUB-ASSY OUTER FRONT (See page 11-13 )
9. REMOVE FRONT FENDER APRON SEAL RH
10. REMOVE V-BANK COVER SUB-ASSY
(a) Using a socket hexagon wrench 5, remove the 3 nuts.
(b) Remove the V-bank cover.
A81624
11. REMOVE AIR CLEANER CAP SUB-ASSY (See page 10-7 )
12. REMOVE EMISSION CONTROL VALVE SET
(a) Disconnect the 2 VSV connectors.
(a) (b) Remove the wire harness clamp.
(b)
(a)
A79751
(c) Disconnect the fuel vapor feed hose.
(d) (d) Disconnect the fuel vapor feed hose No. 2.
(e) (e) Disconnect the 2 vacuum hoses.
(e)
(f) Remove the clamp.
(g) Remove the 2 nuts and the emission control valve set.
(f)
(c)
A79752
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 2306
14-8
ENGINE MECHANICAL - VALVE CLEARANCE
13. REMOVE INTAKE AIR SURGE TANK
(d) (a) Disconnect the throttle motor connector.
(b) Disconnect the water by-pass hose No. 3.
(c) Disconnect the water by-pass hose No. 2.
(c) (a) (d) Disconnect the union to check valve hose.
(b)
A81623
(e) Disconnect the ventilation hose.
(e)
A79706
(f) Remove the 2 set nuts of the pressure feed tube.
A79707
(h) (g) Remove the 2 bolts and the engine hunger No. 1.
(g) (h) Remove the 2 bolts and the surge tank stay No. 1.
(i) Remove the 2 bolts and the surge tank stay No. 2.
(i)
A81674
(j) Using a socket hexagon wrench 8, remove the 4 bolts.
(k) Remove the 2 nuts, the emission control valve bracket
and the intake air surge tank.
(l) Remove the gasket from the intake air surge tank.
A81622
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 2307
14-9
ENGINE MECHANICAL - VALVE CLEARANCE
14. REMOVE RADIATOR HOSE INLET
15. REMOVE IGNITION COIL ASSY
16. REMOVE CYLINDER HEAD COVER SUB-ASSY
(a) Remove the 2 engine wire harness clamps.
(b) Remove the 3 nuts and disconnect the engine wire har-
ness.
(c) Remove the 9 bolts and the cylinder head cover.
A78541
17. REMOVE CYLINDER HEAD COVER SUB-ASSY LH
(a) Using an E6 torx◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo