Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 09 203ew x040001

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
x040001


>> Download x040001 documenatation <<

Text preview - extract from the document
                                                                                                           14-5
                                  ENGINE MECHANICAL     -   DRIVE BELT


DRIVE BELT
                                                                                                          1405G-06


REPLACEMENT
1.   REMOVE FRONT WHEEL RH
2.   REMOVE FRONT FENDER APRON SEAL RH




                                                3.    REMOVE V (COOLER COMPRESSOR TO
                  A
                                                      CRANKSHAFT PULLEY) BELT NO.1
                                                (a)   Loosen bolts A and B.
                                       C        (b)   Loosen the adjusting bolt C, and remove the V-ribbed
                                                      belt.



                                   B
                                       A78698



                   A                            4.    REMOVE VANE PUMP V BELT
                                                (a)   Loosen bolts A and B, and remove the V-ribbed belt.




                                       B


                                       A78699



                   A                            5.    INSTALL VANE PUMP V BELT
                                                (a)   Install the V-ribbed belt on each pulley.
                                                (b)   Using a bar, adjust the V-ribbed belt tension and tighten
                                                      bolt B.
                                                      Torque: 44 Nm (449 kgfcm, 32 ftlbf)
                                                (c)   Tighten bolt A.
                                       B              Torque: 44 Nm (449 kgfcm, 32 ftlbf)

                                       A78699



                                                6.    INSTALL V (COOLER COMPRESSOR TO
                  A
                                                      CRANKSHAFT PULLEY) BELT NO.1
                                                (a)   Install the V-ribbed belt on each pulley.
                                       C        (b)   Tighten the adjusting bolt C, and adjust the V-ribbed belt
                                                      tension.
                                                (c)   First tighten bolt A, then tighten bolt B.
                                                      Torque:
                                   B                  Bolt A 58 Nm (591 kgfcm, 43 ftlbf)
                                       A78698         Bolt B 18 Nm (184 kgfcm, 13 ftlbf)

 2005 SIENNA REPAIR MANUAL (RM1163U)

                                                                  Author :            Date :              2304
14-6
                                  ENGINE MECHANICAL   -   DRIVE BELT

7.     INSPECT DRIVE BELT DEFLECTION AND TENSION (REFERENCE) (See page 14-1 )
8.     INSTALL FRONT WHEEL RH
       Torque: 103 Nm (1,050 kgfcm, 76 ftlbf)




 2005 SIENNA REPAIR MANUAL (RM1163U)

                                                                 Author :   Date :   2305



◦ Jabse Service Manual Search 2026 ◦ Jabse PravopisonTap.bg ◦ Other service manual resources online : FixyaeServiceinfo