Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 15 200s5 a040001

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download a040001 documenatation <<

Text preview - extract from the document

                                                                                                                       26-7
                                   FRONT SUSPENSION           -      FRONT WHEEL ALIGNMENT


FRONT WHEEL ALIGNMENT
                                                                                                                      2605T-06


ADJUSTMENT
1.         INSPECT TIRE (See page 28-1 )

                                                    2.   MEASURE VEHICLE HEIGHT
 Front:
                                                    Vehicle height:
                                                    FF:
                                                        Front (A - B)                        114 mm (4.48 in.)
                                                        Rear (D - C)                      -18.0 mm (-0.7 in.)
                                                    4WD:
       A                                                Front (A - B)                        116 mm (4.57 in.)
                                       B
                                                        Rear (D - C)                      -53.5 mm (-21 in.)
                                           F44627
                                                    Measuring points:
                                                    A: Ground clearance of front wheel center
     Rear:                                          B: Ground clearance of lower suspension arm No.2 set bolt
                                                    center
                                                    C: Ground clearance of rear axle carrier bush set bolt cen-
                                                    ter
                                                    D: Ground clearance of rear wheel center
                                                    NOTICE:
       C                               D            Before inspecting the wheel alignment, adjust the vehicle
                                                    height to the specified value.
                                           F44628
                                                    If the vehicle height is not the specified value, Adjust it by push-
                                                    ing down or lifting the body.




                                           B        3.   INSPECT TOE-IN
       A
                       D                            Toe-in:
                      Front                                Toe-in                     A + B: 0

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo