Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 16 20429 x040001

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download x040001 documenatation <<

Text preview - extract from the document

                                                                                                             26-19
                                  FRONT SUSPENSION     -   LOWER BALL JOINT ASSY FRONT LH


LOWER BALL JOINT ASSY FRONT LH
                                                                                                             260DK-02


REPLACEMENT
HINT:
COMPONENTS: See page 26-3 .
1.    REMOVE FRONT WHEEL
2.    REMOVE FRONT AXLE HUB LH NUT (See page 30-18 )
      SST 09930-00010
3.    SEPARATE SPEED SENSOR FRONT LH (See page 30-18 )
4.    SEPARATE FRONT DISC BRAKE CALIPER ASSY LH (See page 30-39 )
5.    REMOVE FRONT DISC
6.    SEPARATE TIE ROD ASSY LH (See page 30-18 )
      SST 09628-6201 1
7.    SEPARATE FRONT SUSPENSION ARM SUB-ASSY LOWER NO.1 LH (See page 30-18 )
8.    REMOVE FRONT AXLE ASSY LH (See page 30-39 )




                                               9.    REMOVE LOWER BALL JOINT ASSY FRONT LH
                                               (a)   Remove the cotter pin and nut.
                                               (b)   Using SST, remove the lower ball joint assy front LH.
                                                     SST 09628-6201 1




                                      F40153



                                               10.   INSPECT LOWER BALL JOINT ASSY FRONT LH
                                               (a)   As shown in the illustration, flip the ball joint stud back and
                                                     forth 5 times, before installing the nut.
                                               (b)   Using a torque wrench, turn the nut continuously at a rate
                                                     of 3 - 5 seconds per 1 turn and take the torque reading
                                                     on the 5th turn.
                                                     Turning torque:
                                                     0.98 - 3.43 N

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo