Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 16 20ul8l02 x040001

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download x040001 documenatation <<

Text preview - extract from the document

26-24
                                  FRONT SUSPENSION     -   STABILIZER BAR FRONT (4WD)


STABILIZER BAR FRONT (4WD)
                                                                                                       260DL-02


REPLACEMENT
HINT:
COMPONENTS: See page 26-3 .
1.    REMOVE FRONT WHEELS
2.    REMOVE FRONT STABILIZER LINK ASSY LH (See page 26-21 )
3.    REMOVE FRONT STABILIZER LINK ASSY RH
HINT:
Remove the RH side by the same procedures as the LH side.
4.    REMOVE EXHAUST PIPE ASSY CENTER (See page 15-6 )




                                               5.    REMOVE FRONT STABILIZER BRACKET NO.1 LH
                                               (a)   Remove the 2 bolts, the front stabilizer bracket No.1 LH
                                                     and the front stabilizer bracket No.2 LH.




                                      F44966



6.    REMOVE FRONT STABILIZER BRACKET NO.1 RH
HINT:
Remove the RH side by the same procedures as the LH side.
7.    SEPARATE TIE ROD ASSY LH (See page 30-18 )
      SST 09628-6201 1
8.    SEPARATE TIE ROD ASSY RH
      SST 09628-6201 1
HINT:
Remove the RH side by the same procedures as the LH side.
9.    SEPARATE PRESSURE FEED TUBE ASSY (See page 51-19 )
      SST 09023-12701
10. SEPARATE STEERING INTERMEDIATE SHAFT ASSY (See page 51-19 )
11. REMOVE RACK & PINION POWER STEERING GEAR ASSY (See page 51-19 )
12. REMOVE EXHAUST MANIFOLD HEAT INSULATOR NO.1 (See page 14-33 )
13. REMOVE MANIFOLD STAY (See page 14-33 )
14. REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSY (See page 14-33 )
15. REMOVE FRONT STABILIZER BAR BUSH NO.1
16. REMOVE STABILIZER BAR FRONT




2005 SIENNA REPAIR MANUAL (RM1163U)

                                                                  Author :              Date :           2601
                                                                                                                26-25
                                  FRONT SUSPENSION         -   STABILIZER BAR FRONT (4WD)

                                                  17.   INSPECT FRONT STABILIZER LINK ASSY LH
                                                  (a)   As shown in the illustration, flip the ball joint stud back and
                                                        fotth 5 times, before installing the nut.
                                                  (b)   Using a torque wrench, turn the nut continuously at a rate
                                                        of 2 - 4 seconds per 1 turn and take the torque reading
                                                        on the 5th turn.
                                                        Turning torque:
                                                        0.05 - 1.96 Nm (0.5 - 20 kgfcm, 0.4 - 17.4 in.lbf)
                                         C66721



18.   INSTALL STABILIZER BAR FRONT




                                                  19.    INSTALL FRONT STABILIZER BAR BUSH NO.1
                               Front Side         (a)    Install the 2 front stabilizer bar bush No.1 to the stabilizer
      Inner Side
                                                         bar front.
                                                  NOTICE:
                                                  Install the bushings with the slit facing on the rear side of
                                                  the vehicle.
                                                  HINT:
                                  Slit
                                                  Install the bushing to the outer side of the bushing stopper on
                   Rear Side             F44967   the stabilizer bar as shown in the illustration.

20.   INSTALL EXHAUST MANIFOLD CONVERTER SUB-ASSY (See page 14-33 )
21.   INSTALL MANIFOLD STAY (See page 14-33 )
22.   INSTALL EXHAUST MANIFOLD HEAT INSULATOR NO.1 (See page 14-33 )
23.   INSTALL STEERING INTERMEDIATE SHAFT ASSY (See page 51-19 )
24.   INSTALL RACK & PINION POWER STEERING GEAR ASSY (See page 51-19 )
25.   CONNECT PRESSURE FEED TUBE ASSY (See page 51-19 )
      SST 09023-12701
26.   INSTALL TIE ROD ASSY LH (See page 30-18 )
27.   INSTALL TIE ROD ASSY RH
HINT:
Remove the RH side by the same procedures as the LH side.




                                                  28.   INSTALL FRONT STABILIZER BRACKET NO.1 LH
                                                  (a)   Install the front stabilizer bracket No.1 LH with the 2 bolts.
                                                        Torque: 17 Nm (173 kgfcm, 12 ftlbf)




                                         F44966



2005 SIENNA REPAIR MANUAL (RM1163U)

                                                                     Author :               Date :               2602
26-26
                                  FRONT SUSPENSION   -   STABILIZER BAR FRONT (4WD)

29. INSTALL FRONT STABILIZER BRACKET NO.1 RH
HINT:
Install the RH side by the same procedures as the LH side.
30. REMOVE EXHAUST PIPE ASSY CENTER (See page 15-6 )
31. INSTALL FRONT STABILIZER LINK ASSY LH (See page 26-21 )
32. INSTALL FRONT STABILIZER LINK ASSY RH
HINT:
Install the RH side by the same procedures as the LH side.
33. INSTALL FRONT WHEELS
34. INSPECT CENTER FRONT WHEEL
35. INSPECT STEERING WHEEL CENTER POINT
36. ADD POWER STEERING FLUID
37. BLEED POWER STEERING FLUID (See page 51-3 )
38. CHECK POWER STEERING FLUID LEAKAGE
39. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT (See page 26-7 )




2005 SIENNA REPAIR MANUAL (RM1163U)

                                                                Author :              Date :   2603

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo