Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 17 209cx i740001

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download i740001 documenatation <<

Text preview - extract from the document

27-4
                                       REAR SUSPENSION      -   REAR WHEEL ALIGNMENT


REAR WHEEL ALIGNMENT
                                                                                                                         270DS-01


INSPECTION
1.   INSPECT TIRE (See page 28-1 )
2.   MEASURE VEHICLE HEIGHT (See page 26-7 )
NOTICE:
Before inspecting the wheel alignment, adjust the vehicle height to the specified valve.




    A                                   B        3.   INSPECT TOE-IN
                    D                            Toe-in:
                  Front                           2WD DRIVE TYPE                                Toe-in
                                                     Tire size                                  (total)
                                                                                  A + B: 0_15' " 17' (0.25_ " 0.28_)
                                                      215/65R 16
                                                                                 C - D: 2.7 " 3.0 mm (0.11 " 0.12 in.)
                                                                                  A + B: 0_15' " 17' (0.25_ " 0.28_)
                                                      225/60R 17
                    C                                                            C - D: 2.8 " 3.0 mm (0.11 " 0.12 in.)

                                        SA3213
                                                  4WD DRIVE TYPE                                Toe-in
                                                      Tire size                                 (total)
                                                                                  A + B: 0_07' " 17' (0.12_ " 0.28_)
                                                      225/60R 17
                                                                                 C - D: 1.3 " 3.0 mm (0.05 " 0.12 in.)

                                                 If the toe-in is not within the specified value, inspect the sus-
                                                 pension parts and replace them if necessary.




4.  INSPECT CAMBER
(a) Install the camber-caster-kingpin gauge or position the vehicle on the wheel alignment tester.
(b) Inspect the camber.
Camber:
2WD DRIVE TYPE: Camber                                                            -1 _22' " 30' (-1.37_ " 0.5_)
                                                  Right-left error                       30' (0.5_) or less

4WD DRIVE TYPE: Camber                                                            -1 _25' " 30' (-1.42_ " 0.5_)
                                                  Right-left error                       30' (0.5_) or less

If the measured valve is not within the specified value, inspect the suspension parts for damage and/or wear
and replace them if necessary because camber is not adjustable.




 2005 SIENNA REPAIR MANUAL (RM1163U)

                                                                      Author :                    Date :                   2607

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo