Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 17 20uiy x040001
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download x040001 documenatation <<
Text preview - extract from the document
27-5
REAR SUSPENSION - SHOCK ABSORBER ASSY REAR LH
SHOCK ABSORBER ASSY REAR LH
270DT-01
REPLACEMENT
HINT:
COMPONENTS: See page 27-2
1. REMOVE REAR WHEEL
2. REMOVE REAR SHOCK ABSORBER CAP LH
(a) Remove the shock absorber head cover.
(b) Remove the shock absorber cap LH.
G23895
3. REMOVE SHOCK ABSORBER ASSY REAR LH
(a) Support the rear axle beam with a jack.
C88670
(b) Using a 6 mm hexagon wrench to hold the piston rod, re-
move the lock nut.
G23896
(c) Remove the rear shock absorber LH cushion retainer and
rear shock absorber cushion No.1.
G23897
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 2608
27-6
REAR SUSPENSION - SHOCK ABSORBER ASSY REAR LH
(d) Remove the nut, cushion retainer and shock absorber
assy rear LH.
C88671
(e) Remove the rear spring bumper No.1 LH from the shock
absorber assy rear LH.
C88672
4. INSPECT SHOCK ABSORBER ASSY REAR LH
(a) Push down and pull up the shock absorber rod, and check
that there is no unusual resistance or unusual operation
sound.
If there is any malfunction, replace the shock absorber with a
new one.
NOTICE:
When disposing of the shock absorber, see DISPOSAL on
C88673 page 27-9 .
5. INSTALL SHOCK ABSORBER ASSY REAR LH
(a) Install the rear spring bumper No.1 LH to the shock ab-
sorber assy LH.
C88672
(b) Support the rear axle beam assy with a jack.
(c) Install the rear shock absorber assy rear LH, cushion re-
tainer and nut to the rear axle beam.
C88670
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 2609
27-7
REAR SUSPENSION - SHOCK ABSORBER ASSY REAR LH
(d) Install the rear shock absorber cushion No.1 and rear
shock absorber LH cushion retainer.
(e) Temporary tighten a new lock nut.
G23897
(f) Using a 6 mm hexagon wrench to hold the piston rod, fully
tighten the lock nut.
Torque: 30 Nm (310 kgfcm, 22 ftlbf)
G23896
6. INSTALL REAR SHOCK ABSORBER CAP LH
(a) Install the shock absorber cap LH as shown in the illustra-
tion.
G24672
(b) Install the shock absorber head cover.
G23895
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 2610
27-8
REAR SUSPENSION - SHOCK ABSORBER ASSY REAR LH
7. INSTALL REAR WHEEL
Torque: 103 Nm (1,050 kgfcm, 76 ftlbf)
8. FULLY TIGHTEN SHOCK ABSORBER ASSY REAR LH
(a) Stabilize the shock absorber assy rear LH.
If it is impossible to tighten the nut at this position, support the
rear axle beam with a jack and load the rear compartment with
a mass of approximately 90 kg (198 lb).
Length of shock absorber:
2WD DRIVE TYPE: 234 mm (9.22 in.)
4WD DRIVE TYPE: 258 mm (10.16 in.)
C88682
(b) Fully tighten the nut.
Torque: 115 Nm (1,173 kgfcm, 85 ftlbf)
C88671
9. INSPECT REAR WHEEL ALIGNMENT (See page 27-4 )
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 2611
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo