Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 19 200ta onvein40

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download onvein40 documenatation <<

Text preview - extract from the document

                                                                                                            30-3
                       DRIVE SHAFT / PROPELLER SHAFT    -   DRIVE SHAFT, PROPELLER SHAFT, AXLE
                                                                                                           3001V-05


ON-VEHICLE INSPECTION
1.    REMOVE FRONT WHEEL
2.    DISCONNECT FRONT DISC BRAKE CALIPER ASSY LH (See page 30-39 )
3.    REMOVE FRONT DISC

                                                4.     INSPECT FRONT AXLE HUB BEARING BACKLASH
                                                (a)    Using a dial indicator, check the backlash near the center
                                                       of the axle hub.
                                                       Maximum: 0.05 mm (0.0020 in.)
                                                If the backlash exceeds the maximum, replace the bearing.




                                       F40163



                                                5.     INSPECT FRONT AXLE HUB DEVIATION
                                                (a)    Using a dial indicator, check the deviation at the surface
                                                       of the axle hub outside the hub bolt.
                                                       Maximum: 0.05 mm (0.0020 in.)
                                                If the backlash exceeds the maximum, replace the axle hub.




                                       F40164



6.    INSTALL FRONT DISC
7.    INSTALL FRONT DISC BRAKE CALIPER ASSY LH (See page 30-39 )
8.    INSTALL FRONT WHEEL
      Torque: 103 Nm (1,050 kgfcm, 76 ftlbf)
9.    REMOVE REAR WHEEL
10.   DISCONNECT REAR DISC BRAKE CALIPER ASSY LH(DISC REAR BRAKE TYPE)
      (See page 30-46 )
11.   REMOVE REAR DISC(DISC REAR BRAKE TYPE)
12.   REMOVE REAR BRAKE DRUM SUB-ASSY(DRUM REAR BRAKE TYPE)

                                                13.    INSPECT REAR AXLE HUB BEARING BACKLASH
                                                (a)    Using a dial indicator, check the backlash near the center
                                                       of the axle hub.
                                                       Maximum: 0.05 mm (0.0020 in.)
                                                If the backlash exceeds the maximum, replace the axle hub as-
                                                sembly.



                                       C83015




 2005 SIENNA REPAIR MANUAL (RM1163U)

                                                                  Author :              Date :             2665
30-4
                      DRIVE SHAFT / PROPELLER SHAFT    -   DRIVE SHAFT, PROPELLER SHAFT, AXLE

                                               14.    INSPECT REAR AXLE HUB DEVIATION
                                               (a)    Using a dial indicator, check the deviation at the surface
                                                      of the axle hub outside the hub bolt.
                                                      Maximum: 0.07 mm (0.0027 in.)
                                               If the backlash exceeds the maximum, replace the axle hub as-
                                               sembly.



                                      C83016



15.    INSTALL REAR DISC(DISC REAR BRAKE TYPE)
16.    INSTALL REAR DISC BRAKE CALIPER ASSY LH(DISC REAR BRAKE TYPE)
       (See page 30-46 )
17.    INSTALL REAR BRAKE DRUM SUB-ASSY(DRUM REAR BRAKE TYPE)
18.    INSTALL REAR WHEEL
       Torque: 103 Nm (1,050 kgfcm, 76 ftlbf)




2005 SIENNA REPAIR MANUAL (RM1163U)

                                                                  Author :             Date :              2666

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo