Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 19 2041c x040001

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download x040001 documenatation <<

Text preview - extract from the document

                                                                                                        30-39
                       DRIVE SHAFT / PROPELLER SHAFT    -   FRONT AXLE HUB SUB-ASSY LH
                                                                                                         3006H-09


REPLACEMENT
HINT:
S       COMPONENTS: See page 30-38
S       Replace the RH side by the same procedures as the LH side.
1.      REMOVE FRONT WHEEL
2.      REMOVE FRONT AXLE HUB LH NUT (See page 30-18 )
        SST 09930-00010
3.      SEPARATE SPEED SENSOR FRONT LH (See page 30-18 )


                                                4.   SEPARATE FRONT DISC BRAKE CALIPER ASSY LH
                                                (a)  Removing the 2 bolts, separate the front disc brake cali-
                                                     per assy LH from the steering knuckle LH.
                                                NOTICE:
                                                Using a string and so on, hang down the disc brake caliper.




                                       C67088



5.      REMOVE FRONT DISC
6.      SEPARATE TIE ROD ASSY LH (See page 30-18 )
        SST 09628-6201 1
7.      SEPARATE FRONT SUSPENSION ARM SUB-ASSY LOWER NO.1 LH (See page 30-18 )

                                                8.  REMOVE FRONT AXLE ASSY LH
                                                (a) Using a plastic hammer, separate the front drive shaft
                                                    assy LH from the front axle hub sub-assy LH.
                                                NOTICE:
                                                 S  Be careful not to damage the boot.
                                                 S  Be careful not to damage the boot and ABS speed
                                                    sensor rotor.

                                       D27403



                                                (b)   Remove the 2 bolts, nuts and steering knuckle LH with the
                                                      front axle hub sub-assy LH.




                                       C83023




 2005 SIENNA REPAIR MANUAL (RM1163U)

                                                                  Author :               Date :          2701
30-40
                      DRIVE SHAFT / PROPELLER SHAFT     -   FRONT AXLE HUB SUB-ASSY LH

                                                9.    REMOVE LOWER BALL JOINT ASSY FRONT LH
                                 SST            (a)   Remove the cotter pin and nut.
                                                (b)   Using SST, remove the lower ball joint assy front LH.
                                                      SST 09628-6201 1




                                       F40153



                                                10.   REMOVE FRONT WHEEL BEARING DUST
                                                      DEFLECTOR NO.1 LH
                                                (a)   Using screwdriver, remove the bearing dust deflector
                                                      No.1 LH.




                                       F40154



                                                11.   REMOVE FRONT AXLE HUB LH HOLE SNAP RING
                                                (a)   Using snap ring pliers, remove the front axle hub LH hole
                                                      snap ring.




  C83852                               F45465



                                                12.   REMOVE FRONT AXLE HUB SUB-ASSY LH
                                                (a)   Using SST, remove the front axle hub sub-assy LH.
                                                      SST 09520-00031
        SST




                                       F40156



                                                (b)   Using SST and a press, remove the bearing inner race
                                                      (outside) from the front axle hub sub-assy LH.
                           SST                        SST 09950- 00020, 09950- 60010 (09951- 00430),
                                                              09950-70010 (09951-07100)




                                       F02261



2005 SIENNA REPAIR MANUAL (RM1163U)

                                                                  Author :               Date :           2702
                                                                                                      30-41
                       DRIVE SHAFT / PROPELLER SHAFT   -   FRONT AXLE HUB SUB-ASSY LH

13.    REMOVE DISC BRAKE DUST COVER FRONT LH
(a)    Using a torx

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo