Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 19 2041d x040001

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download x040001 documenatation <<

Text preview - extract from the document

30-44
                         DRIVE SHAFT / PROPELLER SHAFT   -   FRONT AXLE LH HUB BOLT


FRONT AXLE LH HUB BOLT
                                                                                                            30020-05


REPLACEMENT
HINT:
S       COMPONENTS: See page 30-38
S       Replace the RH side by the same procedures as the LH side.
1.      REMOVE FRONT WHEEL
2.      SEPARATE FRONT DISC BRAKE CALIPER ASSY LH (See page 30-39 )
3.      REMOVE FRONT DISC

                                                 4.    REMOVE FRONT AXLE LH HUB BOLT
                                                 (a)   Using SST and a screwdriver or an equivalent to hold the
     SST
                                                       front axle hub, remove the front axle LH hub bolt.
                                                       SST 09628-1001 1

                                       Hold



                  Turn                  D27405



                                                 5.    INSTALL FRONT AXLE LH HUB BOLT
                                                 (a)   Install a washer and nut to a new front axle LH hub bolt
     Washer                                            as shown in the illustration.
        Nut                                      (b)   Using a screwdriver to hold the front axle hub, install the
                                                       hub bolt by torquing the nut.
                                       Hold



                  Turn                  D27401



6.      INSTALL FRONT DISC
7.      INSTALL FRONT DISC BRAKE CALIPER ASSY LH (See page 30-39 )
8.      INSTALL FRONT WHEEL
        Torque: 103 Nm (1,050 kgfcm, 76 ftlbf)




 2005 SIENNA REPAIR MANUAL (RM1163U)

                                                                    Author :             Date :               2706

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo