Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 19 209a1 x040001

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download x040001 documenatation <<

Text preview - extract from the document

                                                                                                           30-51
                       DRIVE SHAFT / PROPELLER SHAFT      -   REAR AXLE LH HUB BOLT


REAR AXLE LH HUB BOLT
                                                                                                            300JH-01


REPLACEMENT
HINT:
S         COMPONENTS:
          FF: See page 30-45
          4WD: See page 30-48
          Replace the RH side by the same procedures as the LH side.
1.        REMOVE REAR WHEEL
2.        SEPARATE REAR DISC BRAKE CALIPER ASSY LH (DISC REAR BRAKE TYPE)
(a)       Removing the 2 bolts, separate the rear disc brake caliper assy LH.
3.        REMOVE REAR DISC (DISC REAR BRAKE TYPE)
4.        REMOVE REAR BRAKE DRUM SUB-ASSY (DRUM REAR BRAKE TYPE)


                                                  5.    REMOVE REAR AXLE LH HUB BOLT
                                                  (a)   Using SST and a hammer handle or an equivalent to hold
                                                        the hub & bearing assy, remove the LH hub Bolt.
                                   SST                  SST 09628-1001 1



       Hold                     Turn

    C97691                               F45055




                       Washer                     6.    INSTALL REAR AXLE LH HUB BOLT
                                                  (a)   Install a washer and nut to a new bolt as shown in the il-
                                                        lustration.
                                                  (b)   Using a hammer handle or an equivalent to hold the hub
                                                        & bearing assy, install the LH hub bolt by tightening the
                                                        nut.
                            Turn       Nut
      Hold

 C97692                                  F45056



7.        INSTALL REAR BRAKE DRUM SUB-ASSY (DRUM REAR BRAKE TYPE)
8.        INSTALL REAR DISC (DISC REAR BRAKE TYPE)
9.        INSTALL REAR DISC BRAKE CALIPER ASSY LH (DISC REAR BRAKE TYPE)
(a)       Install the rear disc brake caliper assy LH with the 2 bolts.
          Torque: 88 Nm (900 kgfcm, 65 ftlbf)
10.       INSTALL REAR WHEEL
          Torque: 103 Nm (1,050 kgfcm, 76 ftlbf)




 2005 SIENNA REPAIR MANUAL (RM1163U)

                                                                    Author :            Date :              2713

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo