Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 11 203bj x040001

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document
x040001

>> Download x040001 documenatation <<

Text preview - extract from the document

                                                                                                    16-13
                                               COOLING   -   WATER PUMP ASSY
                                                                                                     160M2-02


REPLACEMENT
1.    DRAIN COOLANT (See page 16-8 )
2.    REMOVE FRONT WHEEL RH
3.    REMOVE FRONT WIPER ARM HEAD CAP
4.    REMOVE FR WIPER ARM RH (See page 66-8 )
5.    REMOVE FR WIPER ARM LH (See page 66-8 )
6.    REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSY (See page 66-8 )
7.    REMOVE WIPER LINK ASSY (See page 66-8 )
8.    REMOVE COWL TOP TO COWL BRACE INNER NO.1 (See page 11-13 )
9.    REMOVE COWL TOP PANEL SUB-ASSY OUTER FRONT (See page 11-13 )
10.   REMOVE FRONT FENDER APRON SEAL RH
11.   REMOVE V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT NO.1
      (See page 14-5 )
12.   REMOVE VANE PUMP V BELT (See page 14-5 )
13.   REMOVE ENGINE MOVING CONTROL ROD (See page 14-84 )
14.   REMOVE ENGINE MOUNTING STAY NO.2 RH (See page 14-84 )
15.   REMOVE GENERATOR BRACKET NO.2 (See page 14-84 )
16.   REMOVE CRANKSHAFT PULLEY (See page 14-84 )
      SST 09213-54015 (91651-60855), 09330-00021, 09950-50013 (09951-05010, 09952-05010,
             09953-05020, 09954-05031)
17.   REMOVE TIMING BELT NO.1 COVER
18.   REMOVE TIMING BELT NO.2 COVER (See page 14-84 )
19.   REMOVE ENGINE MOUNTING BRACKET RH (See page 14-84 )
20.   REMOVE TIMING BELT GUIDE NO.2
21.   REMOVE TIMING BELT (See page 14-84 )
22.   REMOVE TIMING BELT IDLER SUB-ASSY NO.2
23.   REMOVE CAMSHAFT TIMING PULLEY (See page 14-99 )
      SST 09960-10010 (09962-01000, 09963-01000), 09249-63010
24.   REMOVE TIMING BELT NO.3 COVER (See page 14-99 )
25.   REMOVE TIMING BELT IDLER SUB-ASSY NO.1
(a)   Using a 10 mm socket hexagon wrench, remove the pivot bolt, the timing belt idler No.1 and the plate
      washer.



                                               26.   REMOVE WATER PUMP ASSY
                                               (a)   Remove the 3 bolts, the 3 nuts and the water pump.




                                      A78535



27.   INSTALL WATER PUMP ASSY
(a)   Install a new gasket and the water pump with the 3 bolts and the 3 nuts.
      Torque: 8.0 Nm (82 kgfcm, 71 in.lbf)


2005 SIENNA REPAIR MANUAL (RM1163U)

                                                                  Author :         Date :            2513
16-14
                                             COOLING   -   WATER PUMP ASSY

28.     INSTALL TIMING BELT IDLER SUB-ASSY NO.1
(a)     Using a 10 mm socket hexagon wrench, install the plate washer and the timing belt idler No.1 with the
        pivot bolt.
        Torque: 34 Nm (347 kgfcm, 25 ftlbf)
29.     INSTALL TIMING BELT NO.3 COVER (See page 14-99 )
30.     INSTALL CAMSHAFT TIMING PULLEY (See page 14-99 )
        SST 09960-10010 (09962-01000, 09963-01000), 09249-63010
31.     INSTALL TIMING BELT IDLER SUB-ASSY NO.2 (See page 14-99 )
32.     INSPECT TIMING BELT (See page 14-84 )
33.     INSTALL TIMING BELT (See page 14-84 )
        SST 09960-10010 (09962-01000, 09963-01000)
34.     INSTALL CHAIN TENSIONER ASSY NO.1 (See page 14-84 )
35.     INSTALL TIMING BELT GUIDE NO.2 (See page 14-84 )
36.     INSTALL ENGINE MOUNTING BRACKET RH (See page 14-84 )
37.     INSTALL TIMING BELT NO.2 COVER (See page 14-84 )
38.     INSTALL TIMING BELT NO.1 COVER (See page 14-84 )
39.     INSTALL CRANKSHAFT PULLEY (See page 14-84 )
        SST 09213-54015 (91651-60855), 09330-00021
40.     INSTALL GENERATOR BRACKET NO.2 (See page 14-84 )
41.     INSTALL ENGINE MOUNTING STAY NO.2 RH (See page 14-84 )
42.     INSTALL ENGINE MOVING CONTROL ROD (See page 14-84 )
43.     INSTALL VANE PUMP V BELT (See page 14-5 )
44.     INSTALL V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT NO.1
        (See page 14-5 )
45.     INSPECT DRIVE BELT DEFLECTION AND TENSION (REFERENCE) (See page 14-1 )
46.     INSTALL COWL TOP PANEL SUB-ASSY OUTER FRONT (See page 11-13 )
47.     INSTALL COWL TOP TO COWL BRACE INNER NO.1 (See page 11-13 )
48.     INSTALL WIPER LINK ASSY (See page 66-8 )
49.     INSTALL FR WIPER ARM LH (See page 66-8 )
50.     INSTALL FR WIPER ARM RH (See page 66-8 )
51.     INSTALL FRONT WHEEL RH (See page 14-5 )
52.     ADD COOLANT (See page 16-8 )
53.     CHECK FOR ENGINE COOLANT LEAKS (See page 16-1 )




2005 SIENNA REPAIR MANUAL (RM1163U)

                                                                 Author :            Date :             2514

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo