Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 25 20dc6 onvein40

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
onvein40


>> Download onvein40 documenatation <<

Text preview - extract from the document
                                                                                                              51-3
                                      POWER STEERING     -   POWER STEERING SYSTEM
                                                                                                             5105M-08


ON-VEHICLE INSPECTION



                                                1.     INSPECT DRIVE BELT
                                                (a)    Visually check the belt for excessive wear, frayed cords,
                                                       etc.
                                                If any defect is found, replace the drive belt.
                                                HINT:
                                                Cracks on the rib side of a belt are considered acceptable. If the
                                                missing chunks from the ribs are found on the belt, it should be
                                                replaced.
                                       F40449   2.     BLEED POWER STEERING SYSTEM
                                                (a) Check the fluid level.
                                                (b) Jack up the front of the vehicle and support it with the
                                                       stands.
                                                (c) Turn the steering wheel.
                                                       (1) With the engine stopped, turn the wheel slowly from
                                                             lock to lock several times.
                                                (d) Lower the vehicle.
                                                (e) Start the engine.
                                                       (1) Run the engine at idle for a few minutes.
                                                (f)    Turn the steering wheel.
                                                       (1) With the engine idling, turn the wheel to left or right
                                                             full lock position and keep it there for 2 - 3 seconds,
                                                             then turn the wheel to the opposite full lock position
                                                             and keep it there for 2 - 3 seconds.
                                                       (2) Repeat (1) several times.
                                                (g) Stop the engine.
                                                (h) Check for foaming or emulsification.
      Normal               Abnormal             If the system has to be bled twice especially because of foaming
                                                or emulsification, check for fluid leaks in the system.
                                                (i)    Recheck the fluid level.




                                       F40897




2005 SIENNA REPAIR MANUAL (RM1163U)

                                                                  Author :               Date :               2892
51-4
                                      POWER STEERING     -   POWER STEERING SYSTEM

                                                3.     CHECK FLUID LEVEL
                                                (a)    Keep the vehicle level.
                                                (b)    With the engine stopped, check the fluid level in the oil
                                                       reservoir.
                                                If necessary, add fluid.
                                                       Fluid: ATF DEXRON



◦ Jabse Service Manual Search 2026 ◦ Jabse PravopisonTap.bg ◦ Other service manual resources online : FixyaeServiceinfo