Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 26 20tvd x040001

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download x040001 documenatation <<

Text preview - extract from the document

                               HEATER & AIR CONDITIONER      -   V (COOLER COMPRESSOR TO CRANKSHAFT           55-29
                                                                 PULLEY) BELT NO.1


V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY)
BELT NO.1
                                                                                                               550Y5-03


REPLACEMENT
                                      Bolt B       1.      REMOVE V (COOLER COMPRESSOR TO
                                                           CRANKSHAFT PULLEY) BELT NO.1
            Bolt C
                                                   (a)     Loosen the bolt C.
                                                   (b)     Loosen the bolt A.
                                                   (c)     Loosen the bolt B and remove the V (cooler compressor
                      Bolt A                               to crankshaft pulley)belt No. 1.



                                          I30370



                                                   2.      INSTALL V (COOLER COMPRESSOR TO
                                                           CRANKSHAFT PULLEY) BELT NO.1
                                                   (a)     Temporarily install the V (cooler compressor to crankshaft
                                                           pulley)belt No. 1 as illustrated.




                                          I30370




                                      Bolt B       3.      ADJUST V (COOLER COMPRESSOR                              TO
                                                           CRANKSHAFT PULLEY) BELT NO.1
                                                   (a)     Apply drive belt tension by turning the bolt B.
                                                           Drive Belt Tension:
                     Measuring                             New Belt: 165 " 27 lbf
                     Position                              Used belt: 88 " 22 lbf
                                                   HINT:
                                                   S       "New belt" refers to a belt which has been used less than
                                          I30370           5 minutes on a running engine.
                                                   S       "Used belt" refers to a belt which has been used on a run-
                                                           ning engine for 5 minutes or more.
        DENSO                  Boroughs




                                          N01881




2005 SIENNA REPAIR MANUAL (RM1163U)

                                                                      Author :             Date :              2955
55-30                          HEATER & AIR CONDITIONER   -   V (COOLER COMPRESSOR TO CRANKSHAFT
                                                              PULLEY) BELT NO.1

                                                  S     Check that the drive belt fits properly in the ribbed
                                                        grooves.




   Correct               Wrong

                                         I36012



                                                  4.    FULLY TIGHTEN V (COOLER COMPRESSOR TO
                                                        CRANKSHAFT PULLEY) BELT NO.1
             Bolt C
                                                  (a)   Tighten the bolt A.
                                                        Torque: 17.5 Nm (178 kgfcm, 12 ftlbf)
                                                  (b)   Tighten the bolt C.
                      Bolt A                            Torque: 58 Nm (591 kgfcm, 43 ftlbf)



                                         I30370




2005 SIENNA REPAIR MANUAL (RM1163U)

                                                                    Author :            Date :          2956

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo