Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 27 203u7 x040001

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download x040001 documenatation <<

Text preview - extract from the document

60-28
                       SUPPLEMENTAL RESTRAINT SYSTEM    -   SPIRAL CABLE SUB-ASSY


SPIRAL CABLE SUB-ASSY
                                                                                                      60091-16


REPLACEMENT
HINT:
COMPONENTS: See page 60-18
1.    PRECAUTION (SEE PAGE 60-1 )
2.    DISCONNECT BATTERY NEGATIVE TERMINAL (SEE PAGE 60-1 )
3.    PLACE FRONT WHEELS FACING STRAIGHT AHEAD
4.    REMOVE STEERING WHEEL COVER LOWER NO.2 (SEE PAGE 60-19 )
5.    REMOVE STEERING WHEEL COVER LOWER NO.3 (SEE PAGE 60-19 )
6.    REMOVE HORN BUTTON ASSY (SEE PAGE 60-19 )
7.    REMOVE STEERING WHEEL ASSY (SEE PAGE 50-8 )
      SST 09950-50013 (09951-05010, 09952-05010, 09953-05020, 09954-05021)


                                                8.    REMOVE STEERING COLUMN COVER
                                                (a)   Remove the 2 screws and the steering column cover.




                                       H42796



                                                9.    REMOVE SPIRAL CABLE SUB-ASSY
                                                (a)   Disconnect the airbag connector and the connector from
                                                      the spiral cable sub-assy.
                                                (b)   Release the 3 claws and remove the spiral cable sub-
                                                      assy.



          Claw                         H42636



10.     INSPECT SPIRAL CABLE SUB-ASSY
(a)     If the following condition is identified, replace the spiral cable sub-assy with a new one.
        Condition:
        Scratches or cracks on the connector
        Cracks, dents or chipping of the spiral cable sub-assy.
11.     PLACE FRONT WHEELS FACING STRAIGHT AHEAD
(a)     Check that the front wheels are facing straight ahead.




2005 SIENNA REPAIR MANUAL (RM1163U)

                                                                   Author :           Date :            3023
                                                                                                           60-29
                    SUPPLEMENTAL RESTRAINT SYSTEM       -   SPIRAL CABLE SUB-ASSY

12. INSTALL SPIRAL CABLE SUB-ASSY
(a) Set the turn signal switch to the neutral position.
NOTICE:
Make sure of the neutral position since the pin of the turn signal switch may be snapped.
(b) Install the spiral cable sub-assy.
NOTICE:
When replacing the spiral cable sub-assy with a new one, remove the lock pin before installing the
steering wheel assy.
(c) Connect the airbag connector and the connector.
(d) Install the steering column cover with the 2 screws.
                                           13. CENTER SPIRAL CABLE
                                           (a) Check that the ignition switch is OFF.
                                           (b) Check that the battery negative (-) terminal is discon-
                                                 nected.
                                           NOTICE:
                                           Do not start the operation for 90 seconds after removing
                                           the terminal.




                                               (c)   Turn the cable counterclockwise slowly by hand until it be-
                                                     comes harder to turn.




                                      H42773



                                               (d)   Then rotate the cable clockwise about 2.5 turns to align
                                                     the marks.
                                               HINT:
                                               The cable will rotate about 2.5 turns to both left and right of the
                                               center.



                    Marks             H42774



14.   INSTALL STEERING WHEEL ASSY (SEE PAGE 50-8 )
15.   INSPECT STEERING WHEEL CENTER POINT
16.   INSTALL HORN BUTTON ASSY (SEE PAGE 60-19 )
17.   INSPECT HORN BUTTON ASSY (SEE PAGE 60-12 )
18.   INSPECT SRS WARNING LIGHT (SEE PAGE 05-770 )




2005 SIENNA REPAIR MANUAL (RM1163U)

                                                                  Author :             Date :               3024

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo