Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 27 203ud x040001

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download x040001 documenatation <<

Text preview - extract from the document

60-58
                    SUPPLEMENTAL RESTRAINT SYSTEM      -   AIR BAG SENSOR FRONT LH
                                                                                                    600FT-05


REPLACEMENT
HINT:
Replacement procedure of the RH side is the same as that of the LH side.
1.    PRECAUTION (SEE PAGE 60-1 )
2.    DISCONNECT BATTERY NEGATIVE TERMINAL (SEE PAGE 60-1 )




                                               3.    REMOVE AIR BAG SENSOR FRONT LH
                                               (a)   Remove the 2 bolts and the airbag sensor front LH.
                                               (b)   Disconnect the connector from the airbag sensor front
                                                     LH.




                                      H42691



4.  INSTALL AIR BAG SENSOR FRONT LH
(a) Check that the ignition switch is OFF.
(b) Check that the battery negative (-) terminal is disconnected.
NOTICE:
Do not start the operation for 90 seconds after removing the terminal.
(c) Install the airbag sensor front LH with the 2 bolts.
    Torque: 12.5 Nm (127 kgfcm, 9 ftlbf)
NOTICE:
 S  Installation of the connector is performed with the airbag sensor front LH installed. Make sure
    the airbag sensor front LH is installed with the specified torque.
 S  If the airbag sensor front LH has been dropped, or there are cracks, dents or other defects in
    the case, bracket or connector, replace the airbag sensor front LH with a new one.
 S  When installing the airbag sensor front LH, take care that the SRS wiring does not interfere with
    other parts and is not pinched between other parts.
(d) Connect the connector to the airbag sensor front LH.
(e) Check that no play is identified.
5.  INSPECT SRS WARNING LIGHT (SEE PAGE 05-770 )




2005 SIENNA REPAIR MANUAL (RM1163U)

                                                                  Author :           Date :           3053

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo