Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 27 21ph0756 x040001

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download x040001 documenatation <<

Text preview - extract from the document

60-64
                         SUPPLEMENTAL RESTRAINT SYSTEM   -   SEAT POSITION AIR BAG SENSOR
                                                                                                         600OI-07


REPLACEMENT
1.   PRECAUTION (SEE PAGE 60-1 )
2.   DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Waitfor 90 seconds after disconnecting the cable to prevent the airbag working.
3.   REMOVE FRONT LH SEAT ASSY
     (SEE PAGE 72-12 (POWER SEAT) OR 72-22 (MANUAL SEAT))
4.   REMOVE RECLINING ADJUSTER RELEASE HANDLE LH (MANUAL SEAT)
     (SEE PAGE 72-22 )
5.   REMOVE VERTICAL SEAT ADJUSTER KNOB CAP (MANUAL SEAT) (SEE PAGE 72-22 )
6.   REMOVE VERTICAL ADJUSTING HANDLE NO.2 (MANUAL SEAT) (SEE PAGE 72-22 )
7.   REMOVE FRONT SEAT CUSHION SHIELD LH (MANUAL SEAT) (SEE PAGE 72-22 )
8.   REMOVE SLIDE & VERTICAL POWER SEAT SWITCH KNOB (POWER SEAT)
     (SEE PAGE 72-12 )
9.   REMOVE RECLINING POWER SEAT SWITCH KNOB (POWER SEAT) (SEE PAGE 72-12 )
10. REMOVE FRONT SEAT CUSHION SHIELD ASSY (POWER SEAT)
(a) Remove the 5 screws and the front seat cushion shield assy.




                                                 11.   REMOVE SEAT SLIDE POSITION SENSOR
                                                       PROTECTOR
                                                 (a)   Remove the seat slide position sensor protector from the
                                                       seat position airbag sensor.
                                                 12.   REMOVE SEAT POSITION AIR BAG SENSOR
                                                 (a)   Disconnect the connector from the seat position airbag
                                                       sensor.
                                                 (b)   Using a torx

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo