Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 28 20muh d040001
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download d040001 documenatation <<
Text preview - extract from the document
61-9
SEAT BELT - FRONT SEAT BELT
610AN-04
DISPOSAL
HINT:
When scrapping vehicles epuipped with a seat belt pretensioner or disposing of a front seat outer belt (with
seat belt pretensioner), always first activate the seat belt pretensioner in accordance with the procedures
described below. If any abnormality occurs in activation of the seat belt pretensioner, contact the SERVICE
DEPT. of the TOYOTA MOTOR SALES, U.S.A., INC. When disposing of a front seat outer belt assy (with
seat belt pretensioner) that was activated in a collision, follow the same procedures listed in step 2-(e) in
DISPOSAL.
CAUTION:
S Never dispose of an outer belt assy with an inacti-
vated pretensioner.
S The seat belt pretensioner produces a sizeable ex-
SST
ploding sound when it activates, so perform the op-
eration outdoors so that it will not be a nuisance to
nearby residents.
S When activating an outer belt (with seat belt preten-
B50515 sioner), control operation at least 10 m (33 ft) away
from the outer belt.
S Use gloves and safety glasses when handling a seat
belt with an activated pretensioner.
S Always wash your hands with water after completing
activation.
S Do not apply water, etc. to the outer belt with an acti-
vated pretensioner.
S When activating the seat belt pretensioner, always
use the specified SST (SRS airbag deployment tool).
Perform operation in a place away from electrical in-
terference.
SST 09082-00700
1. DISPOSE OF FRONT SEAT OUTER BELT ASSY RH
(WHEN INSTALLED IN VEHICLE)
HINT:
Check that the battery positive voltage is above 12 V.
B50511
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 3071
61-10
SEAT BELT - FRONT SEAT BELT
(a) Check the functioning of SST.
CAUTION:
When activating the seat belt pretensioner, always use the
specified SST.
SST
SST 09082-00700, 09082-00770
B50515
(1) Connect the SST red clip to the battery positive (+)
terminal and the black clip to the battery negative
(-) terminal.
Battery HINT:
Do not connect the yellow connector which should be con-
SST nected to the seat belt pretensioner.
B50511
(2) Press the SST activation switch and check that the
LED of the SST activation switch lights up.
SST CAUTION:
If the LED lights up when the activation switch is not
pressed, the SST may have a malfunction which case that
SST should not be used.
B50514
(b) Disconnect the SST from the battery.
(c) Disconnect the pretensioner connector.
(1) Disconnect the battery negative (-) terminal.
(2) Check the SRS airbag system (See page 60-1 ).
(3) Remove the front door scuff plate RH (See page 76-27 ).
(4) Remove the rear door scuff plate RH (See page 76-27 ).
(5) Remove the front door weatherstrip RH.
(6) Remove the rear door weatherstrip RH.
(7) Remove the center pillar garnish lower RH (See page 76-27 ).
(8) Disconnect the pretensioner connector, as shown
in the illustration.
(d) Connect the SST.
(1) Install the floor anchor of the seat belt.
B69495
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 3072
61-1 1
SEAT BELT - FRONT SEAT BELT
(2) Connect SST, then connect them to the seat belt
pretensioner.
SST 09082-00700, 09082-00770
NOTICE:
To avoid damaging the SST connector and wire harness,
SST SST do not lock the secondary lock of the twin lock.
B69494
(3) Move the SST at least 10 m (33 ft) away from the
front of the vehicle.
(4) Close all the doors and windows of the vehicle.
NOTICE:
Take care not to damage the SST wire harness.
(5) Connect the SST red clip to the battery positive (+)
terminal and the black clip to the negative (-) termi-
10 m or more
nal.
B50513
(e) Activate the seat belt pretensioner.
(1) Confirm that no one is inside the vehicle or within 10 m (33 ft) of the vehicle.
(2) Press the SST activation switch and activate the seat belt pretensioner.
HINT:
The seat belt pretensioner operates simultaneously with the LED light for the SST activation switch.
(f) Dispose of the front seat outer belt (with the seat belt pretensioner).
CAUTION:
S The outer belt is very hot when the seat belt pretensioner is activated, so leave it untouched
for at least 30 minutes after it has been activated.
S Use gloves and safety glasses when handling the outer belt with a pretensioner that has been
activated.
S Always wash your hands with water after completing the operation.
S Do not apply water, etc. to an outer belt assy with a pretensioner that has been activated.
HINT:
When scrapping a vehicle, activate the seat belt pretensioner, and then scrap the vehicle with the activated
outer belt installed.
2. DISPOSE OF FRONT SEAT OUTER BELT ASSY RH (WHEN NOT INSTALLED IN VEHICLE)
NOTICE:
S When disposing of the outer belt (with the seat belt pretensioner) only, never use the custom-
er's vehicle to activate the seat belt pretensioner.
S Be sure to follow the procedures listed below when activating the seat belt pretensioner.
(a) Remove the front seat outer belt (See page 61-7 ).
HINT:
Cut the belt near the seat belt retractor.
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 3073
61-12
SEAT BELT - FRONT SEAT BELT
(b) Check the functioning of SST (See step 1-(a)).
SST 09082-00700, 09082-00770
Battery
SST
B50511
(c) Install the SST.
(1) Connect SST, then connect them to the seat belt
pretensioner.
SST 09082-00700, 09082-00770
NOTICE:
SST SST To avoid damaging the SST connector and wire harness,
do not lock the secondary lock of the twin lock.
B51763
(2) Place the front seat outer belt on the ground and
cover it with a wheel with tire.
NOTICE:
Set up the outer belt assy as shown in the illustration.
(3) Move the SST at least 10 m (33 ft) away from the
disc wheel.
NOTICE:
Take care not to damage the SST wire harness.
SST SST
B69491
(d) Activate the seat belt pretensioner.
(1) Connect the SST red clip to the battery positive (+)
terminal and the black clip to the battery negative
(-) terminal.
(2) Check that no one is within 10 m (33 ft) of the wheel.
(3) Press the SST activation switch and activate the
10 m or More
seat belt pretensioner.
HINT:
B50541 The seat belt pretensioner operates simultaneously with the
LED light for the SST activation switch.
(e) Dispose of the front seat outer belt (with the seat belt pre-
tensioner).
CAUTION:
S The outer belt is very hot when the seat belt preten-
sioner is activated, so leave it untouched for at least
30 minutes after it has been activated.
S Use gloves and safety glasses when handling the
front seat outer belt with the pretensioner that has
B69493 been activated.
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 3074
61-13
SEAT BELT - FRONT SEAT BELT
S Always wash your hands with water after completing
operation.
S Do not apply water, etc. to an outer belt with the pre-
tensioner that has been activated.
(1) Remove the wheel and SST.
(2) Place the outer belt in a plastic bag, tie the end tight-
ly and dispose of it in the same way as other general
parts.
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 3075
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo