Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 20 20416l02 x040001
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download x040001 documenatation <<Text preview - extract from the document 31-5
TRANSFER - TRANSFER RH BEARING RETAINER OIL SEAL (4WD)
TRANSFER RH BEARING RETAINER OIL SEAL (4WD)
3100T-05
REPLACEMENT
HINT:
COMPONENTS: See page 31-3
1. DRAIN AUTOMATIC TRANSAXLE FLUID (See page 40-9 )
2. REMOVE TRANSFER CASE NO.1 PLUG
3. REMOVE TRANSFER DRAIN PLUG
(a) Remove the drain plug, gasket and drain transfer oil.
4. REMOVE FRONT WHEEL
5. REMOVE FRONT DRIVE SHAFT ASSY RH (See page 30-18 )
SST 09520-01010, 09520-24010 (09520-32040)
6. REMOVE TRANSFER RH BEARING RETAINER OIL
SST SEAL
(a) Using SST, remove the RH bearing retainer oil seal.
SST 09308-00010
NOTICE:
Do not damage the oil-seal-fitted surface of the case.
C68563 C83628
7. INSTALL TRANSFER RH BEARING RETAINER OIL
SEAL
SST
(a) Using SST, drive a new oil seal into the case to the posi-
tion shown in the illustration.
SST 09223-4601 1
NOTICE:
Do not install the oil seal obliquely.
0.7 - 1.3 mm (b) Apply small amount of MP grease to the oil seal lip.
C68564 (0.028 - 0.051 in.)
C83629
8. INSTALL FRONT DRIVE SHAFT ASSY RH (See page 30-18 )
9. INSTALL FRONT WHEEL
Torque: 103 Nm (1050 kgfcm, 76 ftlbf)
10. ADD AUTOMATIC TRANSAXLE FLUID
11. INSPECT AUTOMATIC TRANSAXLE FLUID (See page 40-2 )
12. INSTALL TRANSFER DRAIN PLUG
(a) Install the drain plug with a new gasket.
Torque: 49 Nm (500 kgfcm 36 ftlbf)
13. INSTALL TRANSFER CASE NO.1 PLUG
(a) Supply oil up to the level 0 - 5 mm (0 - 0.20 in.) below the lowest end of the plug hole.
Oil quantity: 0.9 L (0.95 US qts, 0.71 lmp.qts)
NOTICE:
When supplying oil, fill it slowly.
(b) Install the plug No. 1 with a new gasket.
Torque: 49 Nm (500 kgfcm, 36 ftlbf)
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 2718
31-6
TRANSFER - TRANSFER RH BEARING RETAINER OIL SEAL (4WD)
14. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT (See page 26-7 )
15. CHECK ABS SPEED SENSOR SIGNAL (See page 05-435 )
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 2719
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo