Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 21 32 200lx f040001
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download f040001 documenatation <<
Text preview - extract from the document
32-4
BRAKE - BRAKE FLUID
BRAKE FLUID
320UV-02
BLEEDING
HINT:
When working on the brake system or when air in the brake lines is suspected, bleed the air from the system.
NOTICE:
S Bleed air in order of the chassis, 3rd chamber, and chassis.
S When the air is bled from the 3rd chamber, be sure to run the engine.
S If the brake fluid attaches to any painted surfaces,wash it off immediately.
1. REMOVE COWL TOP PANEL SUB-ASSY OUTER FRONT (See page 55-33 )
2. FILL RESERVOIR WITH BRAKE FLUID
Fluid: SAE J1703 or FMVSS No. 116 DOT3
G24304
3. BLEED BRAKE LINE
(a) Connect the vinyl tube to the brake caliper bleeder plug.
(b) Depress the brake pedal several times, then loosen the
bleeder plug with the pedal held down.
(c) At the point when the fluid stops coming out, tighten the
bleeder plug, then release the brake pedal.
(d) Repeat (b) and (c) until all the air in the fluid has been bled
out.
C80826 (e) Repeat the above procedure to bleed the air out of the
brake line for each wheel.
Torque: 8.3 Nm (85 kgfcm, 73 in.lbf)
4. BLEED MASTER CYLINDER
NOTICE:
When the air is bled from the master cylinder (3rd cham-
ber), be sure to run the engine.
HINT:
After disassembling the master cylinder or when if the reservoir
becomes empty, bleed the air from the master cylinder.
(a) Run the engine at idle.
F45198 (b) Connect the vinyl tube to the brake caliper bleeder plug.
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 2752
32-5
BRAKE - BRAKE FLUID
(c) Open the brake caliper bleeder plug or wheel cylinder
bleeder plug.
(d) Depress the brake pedal several times, then loosen the
master cylinder (3rd chamber) bleeder plug with the pedal
held down.
(e) At the point when the fluid stops coming out, tighten the
master cylinder (3rd chamber) bleeder plug, then release
the brake pedal.
(f) Repeat (d) and (e) until all the air in the fluid has been bled
out.
(g) Tighten the master cylinder (3rd chamber) bleeder plug.
Torque: 11 Nm (112 kgfcm, 8 ftlbf)
(h) Tighten the brake caliper bleeder plug or wheel cylinder
bleeder plug.
Torque:
Disc: 8.3 Nm (85 kgfcm, 73 in.lbf)
Drum: 11 Nm (112 kgfcm, 8 ft.lbf)
(i) Stop the engine.
5. BLEED BRAKE LINE
(a) Connect the vinyl tube to the brake caliper.
(b) Depress the brake pedal several times, then loosen the
bleeder plug with the pedal held down.
(c) At the point when the fluid stops coming out, tighten the
bleeder plug, then release the brake pedal.
(d) Repeat (b) and (c) until all the air in the fluid has been bled
out.
C80826 (e) Repeat the above procedure to bleed the air out of the
brake line for each wheel.
Torque: 8.3 Nm (85 kgfcm, 73 in.lbf)
6. CHECK FLUID LEVEL IN RESERVOIR
(a) Check the fluid level and add fluid if necessary.
Fluid: SAE J1703 or FMVSS No. 116 DOT3
G24304
7. INSTALL COWL TOP PANEL SUB-ASSY OUTER FRONT (See page 55-33 )
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 2753
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo