Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 22 20bav a040001

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download a040001 documenatation <<

Text preview - extract from the document

33-2
                                        PARKING BRAKE    -   PARKING BRAKE SYSTEM
                                                                                                            330BV-03


ADJUSTMENT
1.      REMOVE REAR WHEEL
2.      ADJUST PARKING BRAKE SHOE CLEARANCE (See page 33-17 )
3.      INSTALL REAR WHEEL
        Torque: 103 Nm (1,050 kgfcm, 76 ftlbf)
4.      INSPECT PARKING BRAKE PEDAL TRAVEL
(a)     Slowly depress the parking brake pedal all the way, and count the number of clicks.
        Parking brake pedal travel: 3 - 5 clicks at 294 N (30 kgf, 66.0 lbf)
5.      DISCONNECT BATTERY NEGATIVE TERMINAL(See page 60-1 )
6.      REMOVE FRONT DOOR SCUFF PLATE LH(See page 71-10 )
7.      REMOVE COWL SIDE TRIM BOARD LH(See page 71-10 )
8.      REMOVE INSTRUMENT PANEL FINISH PANEL SUB-ASSY LOWER LH (See page 71-10 )



                                                 9.    ADJUST PARKING BRAKE PEDAL TRAVEL
                                                 (a)   Depress the parking brake pedal 3 notches to make a
                                                       room for the procedure, and loosen the lock nut.
                                                 (b)   Return the parking brake pedal to the original position.
                                                 (c)   Turn the adjusting nut until the parking brake pedal travel
     Adjusting Nut
                             Lock Nut                  corrects.
                                                 (d)   Depress the parking brake pedal 3 notches to make a
                                                       room for the procedure, and tighten the lock nut.
                                        F45024         Torque: 5.4 Nm (55 kgfcm, 48 in.lbf)
                                                 (e)   Return the parking brake pedal to the original position.
                                                 (f)   Check whether the parking brake drags or not.
                                                 (g)   When operating the parking brake pedal, check that the
                                                       parking brake pedal indicator light goes on.




 2005 SIENNA REPAIR MANUAL (RM1163U)

                                                                    Author :             Date :               2805

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo