Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 23 203vwt2c x040001
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download x040001 documenatation <<
Text preview - extract from the document
40-22
AUTOMATIC TRANSMISSION / TRANS - TRANSMISSION WIRE (U151E/U151F)
TRANSMISSION WIRE (U151E/U151F)
400FS-05
REPLACEMENT
1. REMOVE ENGINE UNDER COVER NO.1
2. DRAIN AUTOMATIC TRANSAXLE FLUID
(a) Remove the drain plug and gasket, and drain ATF.
(b) Install a new gasket and drain plug.
Torque: 49 Nm (500 kgfcm, 36 ftlbf)
3. REMOVE AUTOMATIC TRANSAXLE OIL PAN
SUB-ASSY
(a) Remove the 18 bolts, oil pan and gasket.
NOTICE:
Some fluid will remain in the oil pan. Remove all pan bolts,
and carefully remove the oil pan assembly.
C91925
(b) Remove the 2 magnets from the oil pan.
D30865
(c) Examine particles in the oil pan.
(1) Remove the magnets and use them to collect any
steel chips. Look at the chips and particles in the oil
pan and on the magnet carefully to see the type of
wear which might be found in the transaxle.
Steel (magnetic): bearing, gear and plate wear
Brass (non-magnetic): bearing wear
AT0103
4. DISCONNECT TRANSMISSION WIRE
(a) Disconnect the 7 shift solenoid valve connectors.
(b) Remove the bolt and lock plate, and disconnect the ATF
temperature sensor.
C91927
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 2846
40-23
AUTOMATIC TRANSMISSION / TRANS - TRANSMISSION WIRE (U151E/U151F)
5. REMOVE TRANSMISSION WIRE
(a) Disconnect the transmission wire connectors.
(b) Remove the bolt and transmission wire.
D30866
6. INSTALL TRANSMISSION WIRE
(a) Coat an O-ring of the transmission wire connector with
ATF.
D30867
(b) Install the transmission wire and bolt.
Torque: 5.4 Nm (55 kgfcm, 48 in.lbf)
D30866
7. CONNECT TRANSMISSION WIRE
(a) Coat an O-ring of the ATF temperature sensor with ATF.
(b) Install the ATF temperature sensor with the lock plate and
bolt.
Torque: 6.6 Nm (67 kgfcm, 58 in.lbf)
(c) Connect the 7 shift solenoid valve connectors.
C91927
8. INSTALL AUTOMATIC TRANSAXLE OIL PAN
SUB-ASSY
(a) Install the 2 magnets in the oil pan.
(b) Apply the seal packing or the equivalent to the 18 bolts.
Seal packing:
THREE BOND 1344 or equivalent
D30865
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 2847
40-24
AUTOMATIC TRANSMISSION / TRANS - TRANSMISSION WIRE (U151E/U151F)
(c) Install a new gasket, oil pan and 18 bolts to the transaxle
case.
Torque: 7.8 Nm (80 kgfcm, 69 in.lbf)
NOTICE:
Apply the seal packing or equivalent to the bolts and tight-
en them within 10 minutes after application because the
bolts should be seal bolts.
C91925
9. INSTALL ENGINE UNDER COVER NO.1
10. RESET MEMORY (See page 05-533 )
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 2848
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo