Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 23 203vqt2c x040001
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download x040001 documenatation <<
Text preview - extract from the document
AUTOMATIC TRANSMISSION / TRANS - PARK/NEUTRAL POSITION SWITCH 40-3
ASSY (U151E/U151F)
PARK/NEUTRAL POSITION SWITCH ASSY (U151E/U151F)
4011E-01
REPLACEMENT
1. REMOVE BATTERY
2. REMOVE AIR CLEANER ASSY
3. REMOVE AIR CLEANER HOSE NO.1
4. REMOVE AIR CLEANER INLET NO.2
5. REMOVE AIR CLEANER BRACKET
6. REMOVE AIR CLEANER INLET NO.1
7. REMOVE INTAKE AIR RESONATOR SUB-ASSY
8. REMOVE PARK/NEUTRAL POSITION SWITCH ASSY
(a) Remove the nut from the control shaft lever.
(b) Disconnect the control cable from the control shaft lever.
D30614
(c) Remove the clip and disconnect the control cable from
the control cable bracket.
NOTICE:
Do not hold the resin guide pipe.
D25415
(d) Disconnect the park/neutral position switch connector.
(e) Remove the nut, washer and control shaft lever.
C99458
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 2827
40-4 AUTOMATIC TRANSMISSION / TRANS - PARK/NEUTRAL POSITION SWITCH
ASSY (U151E/U151F)
(f) Using a screwdriver, pry out the lock plate.
C99457
(g) Remove the lock nut and lock plate.
G25453
(h) Remove the 2 bolts and pull out the park/neutral position
switch.
C99454
9. INSTALL PARK/NEUTRAL POSITION SWITCH ASSY
(a) Install the park/neutral position switch to the manual valve
shaft.
(b) Temporarily install the 2 bolts.
C99454
(c) Place the lock plate and tighten the nut.
Torque: 6.9 Nm (70 kgfcm, 61 in.lbf)
(d) Temporarily install the control shaft lever.
G25453
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 2828
AUTOMATIC TRANSMISSION / TRANS - PARK/NEUTRAL POSITION SWITCH 40-5
ASSY (U151E/U151F)
(e) Turn the lever counterclockwise until it stops, then turn it
clockwise for 2 notches.
(f) Remove the control shaft lever.
N D30919
(g) Align the groove with the neutral basic line.
Neutral (h) Hold the switch in position and tighten the 2 bolts.
Basic Line Torque: 5.4 Nm (55 kgfcm, 48 in.lbf)
Groove
C99456
(i) Using a screwdriver, stake the nut with the lock plate.
C99457
(j) Install the control shaft lever, washer and nut.
Torque: 13 Nm (130 kgfcm, 9 ftlbf)
(k) Connect the park/neutral position switch connector.
C99458
(l) Install the control cable and clip to the bracket.
D25415
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 2829
40-6 AUTOMATIC TRANSMISSION / TRANS - PARK/NEUTRAL POSITION SWITCH
ASSY (U151E/U151F)
(m) Temporarily install the control cable to the control shaft le-
ver with the nut.
D30614
10. ADJUST SHIFT LEVER POSITION (See page 40-44 )
11. INSPECT SHIFT LEVER POSITION (See page 40-44 )
12. INSPECT PARK/NEUTRAL POSITION SWITCH ASSY (See page 40-7 )
13. INSTALL INTAKE AIR RESONATOR SUB-ASSY
14. INSTALL AIR CLEANER INLET NO.1
15. INSTALL AIR CLEANER BRACKET
16. INSTALL AIR CLEANER INLET NO.2
17. INSTALL AIR CLEANER HOSE NO.1
18. INSTALL AIR CLEANER ASSY
19. INSTALL BATTERY
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 2830
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo