Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 23 20411 onvein40
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download onvein40 documenatation <<
Text preview - extract from the document
40-34
AUTOMATIC TRANSMISSION / TRANS - SHIFT LOCK SYSTEM
SHIFT LOCK SYSTEM
40067-05
ON-VEHICLE INSPECTION
1. CHECK SHIFT LOCK OPERATION
(a) Shift the shift lever to P position.
(b) Turn the ignition switch to LOCK.
(c) Check that the shift lever cannot be shifted to any other positions other than P.
(d) Turn the ignition switch ON, depress the brake pedal and check that the shift lever can be shifted to
any other positions.
2. CHECK SHIFT LOCK RELEASE BUTTON OPERATION
(a) Using a small screwdriver, remove the shift lock release cover.
(b) When operating the shift lever with the shift lock release button pressed, check that the lever can be
shifted to any position other than P.
3. CHECK KEY INTERLOCK OPERATION
(a) Turn the ignition switch to ON.
(b) Depress the brake pedal and shift the shift lever to any other position other than P.
(c) Check that the ignition key cannot be turned to LOCK.
(d) Shift the shift lever to P position, turn the ignition key to LOCK and check that the ignition key can be
removed.
4. INSPECT SHIFT LOCK CONTROL UNIT ASSEMBLY
ACC IG (a) Using a voltmeter, measure the voltage at each terminal.
HINT:
Do not disconnect the shift lock control unit assembly connec-
tor.
KLS+
E STP C98999
Terminal Measuring Condition Voltage (V)
6 (ACC) - 8 (E) Ignition switch ACC 10 to 14
6 (ACC) - 8 (E) Ignition switch OFF Below 1
7 (STP) - 8 (E) Depress brake pedal 10 to 14
7 (STP) - 8 (E) Release brake pedal Below 1
6. Ignition switch ACC and P position Below 1
12 (KLS+) -8 (E) 7. Ignition switch ACC and except P position 7.5 to 11
8. Ignition switch ACC and except P position (After approx. 1 second) 6 to 9
1 (IG) - 8 (E) Ignition switch ON 10 to 14
1 (IG) - 8 (E) Ignition switch OFF Below 1
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 2858
40-35
AUTOMATIC TRANSMISSION / TRANS - SHIFT LOCK SYSTEM
(b) Using an ohmmeter, measure the resistance at terminal
E (8) and body ground.
HINT:
Do not disconnect the shift lock control unit assembly connec-
tor.
E C98999
Terminal Measuring Condition Specified Value
8 (E) - Body ground Constant Continuity
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 2859
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo