Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 34 20ulg inspec40
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download inspec40 documenatation <<
Text preview - extract from the document
70-38
WINDSHIELD/WINDOWGLASS/MIRROR - POWER MIRROR CONTROL SYSTEM
700SV-01
INSPECTION
1. INSPECT OUTER MIRROR SWITCH ASSY
LEFT (a) The L side of the left/right adjustment switch:
RIGHT
Inspect the mirror switch resistance.
Left/Right Adjustment Switch
Standard (Left side):
Terminal No. Switch Position Specified Condition
- OFF 10 k or higher
Mirror 4-8
Switch UP Below 1
6-7
4-7
DOWN Below 1
6-8
UP
5-8
LEFT Below 1
6-7
LEFT OFF RIGHT
5-7
RIGHT Below 1
6-8
DOWN
No Pin No Pin If the result is not as specified, replace the switch assy.
(b) The R side of the left/right adjustment switch:
Inspect the mirror switch resistance.
Standard (Right side):
Terminal No. Switch Position Specified Condition
B59702
- OFF 10 k or higher
3-8
UP Below 1
6-7
3-7
DOWN Below 1
6-8
2-8
LEFT Below 1
6-7
2-7
RIGHT Below 1
6-8
If the result is not as specified, replace the switch assy.
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 3220
70-39
WINDSHIELD/WINDOWGLASS/MIRROR - POWER MIRROR CONTROL SYSTEM
2. INSPECT OUTER REAR VIEW MIRROR ASSY LH
(a) Disconnect the mirror connector.
(b) Apply battery voltage and inspect operation of the mirror
(A)
(C)
(D)
face, as shown in the table and illustration.
Standard (LH):
(B) Measurement Condition Mirror Operation
Battery positive (+) MV (6)
Turns upward (A)
Battery negative (-) M+ (7)
Battery positive (+) M+ (7)
Turns downward (B)
Battery negative (-) MV (6)
Battery positive (+) M+ (7)
Turns left (C)
1 2 3 4 5 Battery negative (-) MH (8)
6 7 8 910 Battery positive (+) MH (8)
Turns right (D)
Battery negative (-) M+ (7)
B67609 If the result is not as specified, replace the mirror assy.
3. INSPECT OUTER REAR VIEW MIRROR ASSY RH
(a) Disconnect the mirror connector.
(b) Apply battery voltage and inspect operation of the mirror
(A)
face, as shown in the table and illustration.
(D) Standard (RH):
(C)
(B) Measurement Condition Mirror Operation
Battery positive (+) MV (6)
Turns upward (A)
Battery negative (-) M+ (7)
Battery positive (+) M+ (7)
Turns downward (B)
Battery negative (-) MV (6)
Battery positive (+) M+ (7)
Turns right (D)
Battery negative (-) MH (8)
1 2 3 4 5
Battery positive (+) MH (8)
6 7 8 910 Turns left (C)
Battery negative (-) M+ (7)
B67610 If the result is not as specified, replace the mirror assy.
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 3221
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo