Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 37 20mtp x140001
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download x140001 documenatation <<
Text preview - extract from the document
73-16
THEFT DETERRENT & DOOR LOCK - DOOR CONTROL TRANSMITTER
730E9-02
REGISTRATION
HINT:
S If replacing the door control transmitter or the door control receiver, register the recognition code.
S The add mode is used to register new recognition codes while still retaining codes already registered.
This mode is used when a new transmitter is added. If the number of registered codes exceeds 4, the
previously registered codes will be erased in order, starting from the first registered code.
S The rewrite mode is used to erase all the previously registered recognition codes in order to register
all new recognition codes. This mode is used when the transmitter or the door control receiver is ex-
changed for a new one.
S The confirmation mode is used to confirm how many recognition codes have already been registered
before an additional registration of the recognition codes.
S The prohibition mode is used to erase all the registered codes and disables the wireless door lock func-
tion. This mode is used when the transmitter is lost.
S All the following registration procedures must be performed in order continuously.
1. When using hand-held tester:
REGISTER RECOGNITION CODE
Flow Chart of Recognition Code Registration
START
The vehicle should be in the following condition.
F Ignition switch is turned ON.
1. Select a mode according to display of hand-held tester.
Add Mode or
Rewrite Mode
Number of registered codes is shown.
Continued on next page
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 3324
73-17
THEFT DETERRENT & DOOR LOCK - DOOR CONTROL TRANSMITTER
Continued from previous page
2. Press LOCK and UNLOCK switch on transmitter simultaneously for more than 1 sec.
Within
3 sec.
3. Press the LOCK or UNLOCK switch for more than 1 sec.
Within 30 sec.
Response to registration completion:
Body ECU automatically performs power door LOCK-UNLOCK operation to show which
mode has been selected.
LOCK-UNLOCK Occurs Once LOCK-UNLOCK Occurs Twice
Registration of recognition code has Registration of recognition code has failed.
been completed.
T1 T1 T1
LOCK LOCK
UNLOCK UNLOCK
T1: Approx. 1 sec.
HINT:
When LOCK-UNLOCK operation is performed twice, registration of recognition code has
failed. Perform registration procedures by beginning once again.
Within 40 sec.
Proceed to flow chart to finish If other transmitter is to be registered.
registration. HINT:
4 recognition codes can be registered at one
time.
Perform either of the following.
F Use hand-held tester to order completion.
F Disconnect hand-held tester.
Registration of recognition codes (add mode and rewrite mode) is completed.
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 3325
73-18
THEFT DETERRENT & DOOR LOCK - DOOR CONTROL TRANSMITTER
2. When not using hand-held tester:
REGISTER RECOGNITION CODE
Flow Chart of Recognition Code Registration
START
The following conditions should be met.
F No key in ignition key cylinder.
F Driver side door is opened (Other doors are closed).
F Driver side door is unlocked.
1. Insert key into ignition key cylinder, then pull it out.
Within 5 sec.
2. Insert key into ignition key cylinder, then pull it out.
3. Close and open driver side door twice.
4. Insert key into ignition key cylinder, then pull it out.
Within 40 sec.
5. Close and open driver side door twice.
6. Insert key into ignition switch and close all doors.
Within 40 sec.
Continued on next page
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 3326
73-19
THEFT DETERRENT & DOOR LOCK - DOOR CONTROL TRANSMITTER
Continued from previous page
Mode Selection:
7. Turn ignition switch from LOCK to ON and back to LOCK at approximately
1 second intervals according to the number of times shown below.
Number of ON-LOCK operations of ignition switch:
Add Mode
ON-LOCK operation: 1 time T1: Approx. 1 sec.
T1
ON
LOCK
Rewrite Mode
ON-LOCK operation: 2 times
T1 T1
ON
LOCK
Confirmation Mode
Within 40 sec.
ON-LOCK operation: 3 times
T1 T1
ON
LOCK
Prohibition Mode
ON-LOCK operation: 5 times
T1 T1
ON
LOCK
If the number of the ON-LOCK operations of the ignition switch
is 0, 4 or 6 or more, there will be no response (power door lock and
unlock operation) to show which mode has been selected.
8. Remove key from ignition key cylinder.
Within 3 sec.
Continued on next page
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 3327
73-20
THEFT DETERRENT & DOOR LOCK - DOOR CONTROL TRANSMITTER
Continued from previous page
Within
3 sec.
Response to selected mode (Power door lock operation):
Body ECU automatically performs power door LOCK-UNLOCK operations to inform which
mode has been selected.
Add Mode
LOCK-UNLOCK operation: 1 time
T1: Approx. 1 sec.
T1
T2: Approx. 2 sec.
LOCK
UNLOCK
Rewrite Mode
LOCK-UNLOCK operation: 2 times
T1 T1
LOCK
UNLOCK
Confirmation Mode
LOCK-UNLOCK operation: The number of registered codes (1 - 5 times)
1st time 2nd time
T2 T2
LOCK
UNLOCK
Prohibition Mode
LOCK-UNLOCK operation: 5 times
T1 T1
LOCK
UNLOCK
HINT:
F In the confirmation mode, when LOCK-UNLOCK operation is performed twice, the
number of registered recognition codes is 2.
F In the confirmation mode, when 0 codes are registered, LOCK-UNLOCK operation
is automatically performed 5 times.
Add Mode or Confirmation Mode and
Within Rewrite Mode Prohibition Mode
40 sec.
Continued on next page Registration procedures are completed.
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 3328
73-21
THEFT DETERRENT & DOOR LOCK - DOOR CONTROL TRANSMITTER
Continued from previous page
Within
40 sec.
9. Press LOCK and UNLOCK switches simultaneously on transmitter for more than 1 sec.
Within
3 sec.
10. Press the LOCK or UNLOCK switch for more than 1 sec.
Within
3 sec.
Response to registration completion:
Body ECU automatically performs power door LOCK-UNLOCK operations to show
whether registration has been completed correctly or not.
LOCK-UNLOCK Occurs Once LOCK-UNLOCK Occurs Twice
Registration of recognition code has Registration of recognition code has failed.
been completed.
T1 T1 T1
LOCK LOCK
UNLOCK UNLOCK
T1: Approx. 1 sec.
HINT:
If LOCK-UNLOCK operation is performed twice, registration of recognition code has
failed. Perform registration procedures by beginning once again.
Within 40 sec.
Proceed to flow chart to finish If another transmitter is to be registered.
registration. HINT:
4 recognition codes can be registered
at once.
Perform either of the following.
F Open a door.
F Insert key into ignition key cylinder.
Registration of recognition codes (add mode and rewrite mode) is completed.
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 3329
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo