Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 37 20vj1 onvein40
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download onvein40 documenatation <<
Text preview - extract from the document
73-1
THEFT DETERRENT & DOOR LOCK - POWER DOOR LOCK CONTROL SYSTEM
POWER DOOR LOCK CONTROL SYSTEM
730GP-01
ON-VEHICLE INSPECTION
1. DOOR LOCK FAIL-SAFE
(a) When a malfunction in the door control switch (manual switch, interlocked with key operation) has been
detected, door lock/unlock operation becomes disabled.
2. CHECK ELECTRICAL DOOR LOCK OPERATION
(a) Check the basic function.
(1) Check that all doors lock when the door control switch (for manual operation) is turned to LOCK
and all doors unlock when turned to UNLOCK.
(2) Check that all doors lock when the driver or passenger side door lock key cylinder is turned to
LOCK using the key.
(3) Check that only the driver side door unlocks when the driver side door lock key cylinder is turned
to UNLOCK and all doors unlock when turned to UNLOCK once again within 3 seconds using
the key (2-step unlocking function).
(b) Check the key lock-in prevention function.
NOTICE:
In order to prevent the key from actually being locked-in, the inspection should be made with the
driver side door glass open.
(1) Have the key inserted into the ignition key cylinder.
(2) With the driver side door open, check that all doors unlock immediately after the door lock knob
for the driver side door is turned to LOCK.
(3) With the driver side door open, check that all doors unlock immediately after the door control
switch (for manual operation) is turned to LOCK.
(4) With the driver side door open, turn the driver side door lock knob to LOCK and hold it for 2 se-
conds or more and then close the driver side door. Then check that all doors unlock.
(c) Check the security function.
(1) Close all doors with the driver side door window open so that the door control switch can be oper-
ated from outside the vehicle
(2) Pull out the key, open the driver side door and then close and lock the door without using the
key. Under this condition, check that all doors do not unlock when the door control switch (for
manual operation) is turned to UNLOCK from outside the vehicle.
(3) Pull out the key, close and lock the driver side door by key operation. Under this condition, check
that all doors do not unlock when the door control switch (for manual operation) is turned to UN-
LOCK from outside the vehicle.
(4) Pull out the key, close the driver side door and lock the door by wireless door lock operation.
Under this condition, check that all doors do not unlock when the door control switch (for manual
operation) is turned to UNLOCK from outside the vehicle.
HINT:
Check that the security function is canceled under the following conditions.
S The ignition switch is turned ON.
S The driver side door is unlocked using the key.
S The door control switch (for manual operation) is turned to UNLOCK after the door control knob is
turned to UNLOCK manually.
S The doors are unlocked with wireless operation.
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 3309
73-2
THEFT DETERRENT & DOOR LOCK - POWER DOOR LOCK CONTROL SYSTEM
(d) Check the illumination function.
(1) Set the room light switch in the DOOR position.
(2) With all doors locked, check that all doors unlock when the driver side door lock cylinder is turned
to UNLOCK using the key. At the same time, the room light comes on.
(3) Check that the room light goes off in approximately 15 seconds if doors have not been opened
for a while.
(e) Check the automatic locking function interlocked with the shift lever.
(1) When any door is unlocked with all doors closed and the engine started, check that all doors auto-
matically lock when the shift lever is moved into any position from the P position.
(2) When any door is unlocked after all doors automatically lock, check that all doors attempt to auto-
matically lock once again (retry function). The retry function is canceled when any of the following
conditions is fulfilled:
S All doors are locked.
S Any door is opened.
S The shift lever is moved into the P position.
S The doors are locked or unlocked by the user.
S The ignition switch is turned OFF.
S The engine is stopped.
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 3310
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo