Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 39 20uh4 a040001
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download a040001 documenatation <<
Text preview - extract from the document
75-6
ENGINE HOOD/DOOR - FRONT DOOR
750LV-01
ADJUSTMENT
HINT:
S On the RH side, use the same procedures as on the LH side.
S Since a centering bolt is used as a door hinge mounting
bolt on the body side and the door side, the door can not
be adjusted with it on. Substitute a bolt with a washer for
the centering bolt.
Centering Bolt Standard Bolt
B57104
1. INSPECT FRONT DOOR PANEL SUB-ASSY LH
(a) Check that the clearance is within the standard range.
D E
B
C
A E
F
B67481
Standard:
A 5.0 " 1.5 mm (0.197 " 0.059 in.)
B 5.5 " 1.5 mm (0.220 " 0.059 in.)
C 5.2 " 1.5 mm (0.205 " 0.059 in.)
D 160 mm (6.30 in.)
E 9.2 " 1.5 mm (0.362 " 0.059 in.)
F 6.3 " 1.5 mm (0.250 " 0.059 in.)
2. ADJUST FRONT DOOR PANEL SUB-ASSY LH
(a) Using SST, horizontally and vertically adjust the door by
loosening the body side hinge bolts.
SST 09812-00010, 09812-00020
(b) Tighten the door side hinge bolts after the adjustment.
Torque: 26 Nm (265 kgfcm, 19 ftlbf)
B67487
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 3367
75-7
ENGINE HOOD/DOOR - FRONT DOOR
(c) Adjust the door forward/rearward and vertically by loos-
ening the door side hinge bolts.
(d) Tighten the door side hinge bolts after the adjustment.
Torque: 26 Nm (265 kgfcm, 19 ftlbf)
B67482
(e) Adjust the striker position by slightly loosening the striker
mounting screws and hitting the striker with a plastic-
faced hammer.
(f) Tighten the striker mounting screws after the adjustment.
Torque: 23 Nm (235 kgfcm, 17 ftlbf)
B68038
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 3368
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo