Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 39 20uh6 w040001

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download w040001 documenatation <<

Text preview - extract from the document

                                                                                                       75-91
                                  ENGINE HOOD/DOOR      -   BACK DOOR
                                                                                                        750M4-01


OVERHAUL
HINT:
The installation is in the reverse order of the removal. However, when there is a special point concerning
the installation, it is indicated.

                                                1.    REMOVE BACK DOOR GARNISH CENTER
         Clip
                                                (a)   Using a clip remover, disengage the 5 clips and remove
                                                      the garnish center.
                                                2.    REMOVE BACK DOOR SIDE GARNISH LH
                                                (a)   Using a clip remover, disengage the 3 clips and remove
                                                      the side garnish.
                                                3.    REMOVE BACK DOOR SIDE GARNISH RH
                                                (a)   Using a clip remover, disengage the 3 clips and remove
     B67782                                           the side garnish.
                                       B69688



                                                4.    REMOVE BACK DOOR PULL STRAP
                                                (a)   Using a screwdriver, disengage the claws and remove the
                                                      strap cover.
                                                HINT:
                                                Tape the screwdriver tip before use.
                                                (b) Remove the bolt and strap.

                     Claw
                                       B67784



                                                5.    REMOVE BACK DOOR TRIM BOARD ASSY
                                                (a)   Using the screwdriver, disengage the 14 clips and remove
                                                      the trim board.
                                                HINT:
                                                Tape the screwdriver tip before use.
                                                (b) Remove the service hole cover from the trim board.


         Clip                          B67783



6.      REMOVE BACK-UP LAMP ASSY LH (See page 65-21 )
7.      REMOVE BACK-UP LAMP ASSY RH (See page 65-21 )
8.      REMOVE BACK DOOR GARNISH SUB-ASSY OUTSIDE (See page 76-19 )


                                                9.    REMOVE BACK DOOR LOCK ASSY
                                                (a)   Disconnect the connector.
                                                (b)   Remove the 3 bolts and lock.




                                       B67787



 2005 SIENNA REPAIR MANUAL (RM1163U)

                                                                 Author :              Date :           3452
75-92
                                  ENGINE HOOD/DOOR     -   BACK DOOR

10.     REMOVE BACK DOOR BASE STOPPER BRACKET
(a)     Remove the 4 bolts and 2 stopper brackets.
11.     REMOVE BACK DOOR STOPPER LOWER
(a)     Remove the 4 bolts and 2 stoppers.
12.     REMOVE REAR SPOILER COVER (See page 76-21 )
13.     REMOVE BACK DOOR STAY SUB-ASSY LH (See page 75-1 12)
14.     REMOVE BACK DOOR STAY SUB-ASSY RH (See page 75-1 12)
15.     INSTALL BACK DOOR STOPPER LOWER
(a)     Install the 2 stoppers with the 4 bolts.
        Torque: 7.0 N

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo