Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 39 20uh8 a040001
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download a040001 documenatation <<
Text preview - extract from the document
75-106
ENGINE HOOD/DOOR - POWER BACK DOOR
750M7-01
ADJUSTMENT
HINT:
S On the RH side, use the same procedures as on the LH side.
S Since a centering bolt is used as door hinge mounting
bolts on the body side and the door side, the door can not
be adjusted with them on. Substitute a bolt with a washer
for the centering bolt.
Centering Bolt Standard Bolt
B57104
1. INSPECT BACK DOOR PANEL SUB-ASSY
(a) Check that the clearance is within the standard range.
A
C
B D
B67794
Standard:
A 10.6 " 1.5 mm (0.417 " 0.059 in.)
B 7.0 " 1.5 mm (0.276 " 0.059 in.)
C 6.0 " 1.5 mm (0.236 " 0.059 in.)
D 5.7 " 1.5 mm (0.224 " 0.059 in.)
2. ADJUST BACK DOOR PANEL SUB-ASSY
(a) Adjust the door forward/rearward and vertically by loos-
ening the body side hinge nuts and bolt.
(b) Tighten the body side hinge nuts and bolt after the adjust-
ment.
Torque: 26 Nm (265 kgfcm, 19 ftlbf)
B67789
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 3467
75-107
ENGINE HOOD/DOOR - POWER BACK DOOR
(c) Horizontally and vertically adjust the door by loosening
the door side hinge bolts.
(d) Tighten the body side hinge bolts after the adjustment.
Torque: 26 Nm (265 kgfcm, 19 ftlbf)
B67788
(e) Using a screwdriver, remove the back door scuff plate (See page 76-27 ).
HINT:
Tape the screwdriver tip before use.
(f) Adjust the striker position by slightly loosening the striker
mounting screws and hitting the striker with a plastic-
faced hammer.
(g) Tighten the striker mounting screws after the adjustment.
Torque: 23 Nm (235 kgfcm, 17 ftlbf)
B67790
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 3468
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo