Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 39 20ulr x040001
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download x040001 documenatation <<
Text preview - extract from the document
75-38
ENGINE HOOD/DOOR - SLIDE DOOR SYSTEM
750MD-01
REPLACEMENT
1. REPLACE SLIDE DOOR HALF OPEN STOPPER
SUB-ASSY
(a) Using a screwdriver, remove the 2 clips and cover.
HINT:
Tape the screwdriver tip before use.
B67517
(b) Remove the 2 bolts and disconnect the control cable from
Slide Door Open Striker
the open striker.
Control Cable
B69065
(c) Disconnect the control cable from the half open stopper.
(d) Remove the 2 bolts and half open stopper.
B67518
(e) Install the half open stopper with the 2 bolts.
Torque: 7.0 Nm (71 kgfcm, 62 in.lbf)
(f) Connect the control cable to the half open stopper.
B67518
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 3399
75-39
ENGINE HOOD/DOOR - SLIDE DOOR SYSTEM
(g) Connect the control cable to the open striker with the 2
Slide Door Open Striker
nuts.
Torque: 7.0 Nm (71 kgfcm, 62 in.lbf)
Control Cable
B69065
2. REPLACE SLIDE DOOR HALF OPEN STOPPER
CONTROL ASSY
(a) Using a screwdriver, remove the rear door scuff plate
(See page 76-27 ).
(b) Using a screwdriver, remove the back door scuff plate
(See page 76-27 ).
(c) Using a screwdriver, remove the quarter trim panel (See
Half Open
Control Cable page 76-27 ).
Stopper Control
B67520 (d) Remove the 2 nuts and half open stopper control.
(e) Remove the control cable.
(f) Install the control cable, as shown in the illustration.
Dimension (A): 3.9 " 1.5 mm (0.154 " 0.059 in.)
A B67521
(g) Install the half open stopper control with the 2 nuts.
Torque: 7.0 Nm (71 kgfcm, 62 in.lbf)
Half Open
Stopper Control
B67520
3. REPLACE SLIDE DOOR OPEN STRIKER LH
Slide Door Open Striker
(a) Remove the 2 nuts and open striker.
B67519
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 3400
75-40
ENGINE HOOD/DOOR - SLIDE DOOR SYSTEM
(b) Install the open striker with the 2 nuts.
Slide Door Open Striker
Torque: 7.0 Nm (71 kgfcm, 62 in.lbf)
B67519
4. REPLACE SLIDE DOOR OPEN STRIKER RH
HINT:
Use the same procedures for the LH side.
5. REPLACE SLIDE DOOR OPEN STOP LH
(a) Remove the 2 nuts and open stop.
B67901
(b) Install the open stop with the 2 nuts.
Torque: 7.0 Nm (71 kgfcm, 62 in.lbf)
B67901
6. REPLACE SLIDE DOOR OPEN STOP RH
HINT:
Use the same procedures for the LH side.
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 3401
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo