Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 30 20vio x040001
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download x040001 documenatation <<
Text preview - extract from the document
66-8
WIPER & WASHER - WINDSHIELD WIPER MOTOR ASSY
WINDSHIELD WIPER MOTOR ASSY
660CC-02
REPLACEMENT
1. REMOVE FRONT WIPER ARM HEAD CAP
(a) Using a small screwdriver, remove the 2 front wiper arm
covers.
HINT:
Tape up the screwdriver tip before use.
I35789
2. REMOVE FR WIPER ARM RH
(a) Operate the wiper, and stop the windshield wiper motor assy to the automatic stop position.
(b) Remove the nut and the FR wiper arm RH.
3. REMOVE FR WIPER ARM LH
(a) Remove the nut and the FR wiper arm LH.
4. REMOVE COWL TOP VENTILATOR LOUVER
SUB-ASSY
(a) Remove the 6 claws and the cowl top ventilator louver
sub-assy .
6Claws I35790
5. REMOVE WINDSHIELD WIPER MOTOR & LINK ASSY
(a) Disconnect the connector.
(b) Remove the 4 bolts and wiper motor & link assy.
I35791
6. REMOVE WINDSHIELD WIPER MOTOR ASSY
(a) Using a screwdriver, disengage the meshing of rod at the
crank arm pivot of the windshield wiper motor assy.
I35792
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 3115
66-9
WIPER & WASHER - WINDSHIELD WIPER MOTOR ASSY
(b) Remove the 3 bolts and windshield wiper motor assy from
the windshield wiper link assy.
HINT:
Turning the crank arm by hand prior to the operation will be able
to remove the wiper motor easier.
I35804
7. INSTALL WINDSHIELD WIPER MOTOR ASSY
(a) Apply MP grease to the crank arm pivot of the windshield
wiper motor assy.
(b) Install the windshield wiper motor assy with the 3 bolts to
the windshield wiper link assy.
Torque: 7.5 Nm (76 kgfcm, 66 in.lbf)
I35804
8. INSTALL WINDSHIELD WIPER MOTOR & LINK ASSY
(a) Install the wiper motor & link assy with the 4 bolts.
Torque: 5.5 Nm (56 kgfcm, 49 in.lbf)
(b) Connect the connecter.
9. INSTALL FR WIPER ARM LH
(a) Operate the wiper, and stop the windshield wiper motor
assy to the automatic stop position.
I35791
(b) Scrape off the serration part of the wiper arm with a round
file or equivalent.
(c) Clean the wiper pivot serration with a wire brush.
Wiper Arm Serration
Wire Brush Wiper Pivot Serration
E58837
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 3116
66-10
WIPER & WASHER - WINDSHIELD WIPER MOTOR ASSY
(d) Install the front wiper arm LH with the nut to the position
shown in the illustration.
Torque: 20 Nm (204 kgfcm, 14.8 ftlbf)
Cowl top ventilator louver HINT:
Hold down the arm hinge by hand to fasten the nut.
10. INSTALL FR WIPER ARM RH
(a) Scrape off the serration part of the wiper arm with a round
42 - 52 mm file or equivalent.
(1.65 - 2.05 in.) I35782 (b) Clean the wiper pivot serration with a wire brush.
(c) Install the front wiper arm RH with the nut to the position
shown in the illustration.
Torque: 20 Nm (205 kgfcm, 15 ftlbf)
Cowl top ventilator louver HINT:
Hold down the arm hinge by hand to fasten the nut.
(d) Operate the wiper while running the water or the washer
fluid over the window, and check the wiping condition and
32 - 42 mm that the front wiper does not hit against the vehicle body.
(1.26 - 1.65 in.)
I35783
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 3117
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo